- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I am in troubles with a Supermicro X10SAT motherboard and Samsung SSDs.
Samsung 830 PRO 256GB is not correctly recognized on ports 0, 1 but ok on ports 2, 3. On ports 0,1 the drive is recognized randomly at boot and, if recognized, shows SMART errors and get lost after a while.
Samsung 840 PRO 256GB is not correctly recognized on ports 0, 1 but ok on ports 2, 3. On ports 0,1 the drive is recognized randomly at boot and, if recognized, shows SMART errors and get lost after a while.
Samsung 840 PRO 512GB is correctly recognized on every port!
Every HDD drive, such as Velociraptor, is correctly recognized on every port too.
The only difference I can find on bios from ports 0,1 and 2, 3 is the voice "Port x SATA Device Type" with the options SSD or HDD.
I have tried to contact Supermicro support but it is like to hit a wall with bare hands. They tell it is a Lynx Point incompatibility, they certify only DC3500 and DC3700 SSD, they can do nothing to correct the problem and so on. I think it is the last time I buy that brand.
However, at this point, I can do nothing but ask if some tech guy or a tech from Intel is able to make some tests with similar boards and Samsung SSDs and help me, as with the money I made my boss spend on this server system I am almost f**kd up and will probably lose job.
Please, I need help
Link Copied
![](/skins/images/45C6C2D737ED71F4C51F0145C8CB1E9C/responsive_peak/images/icon_anonymous_message.png)
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page