Hi, I'm trying to set up infiniband connection between host and mic, mic and mic. Host is showing this on ifconfig:
mic0:ib: flags=67<UP,BROADCAST,RUNNING> mtu 64512
inet 192.0.2.100 netmask 255.255.255.0 broadcast 0.0.0.0
ether 4c:79:ba:20:06:63 txqueuelen 1000 (Ethernet)
and two: mic0 and mic1 interfaces.
I have two coprocessors installed. I can run ib_read_bw between host and mic0, but not host and mic1 or mic0 and mic1. Getting error:
Received 10 times ADDR_ERROR
Unable to perform rdma_client function.
ifconfig from mic0:
mic0:ib Link encap:Ethernet HWaddr 4C:79:BA:20:06:62
inet addr:192.0.2.101 Bcast:0.0.0.0 Mask:255.255.255.0
UP BROADCAST RUNNING MTU:64512 Metric:1
iconfig from mic1:
mic0:ib Link encap:Ethernet HWaddr 4C:79:BA:20:06:9C
inet addr:192.0.2.102 Bcast:0.0.0.0 Mask:255.255.255.0
UP BROADCAST RUNNING MTU:64512 Metric:1
Also, there is no ping between host and mic1, mic1 and mic0.
Do I have to do some configuration setup?
Thanks,
Azamat
