- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hardware: intel Bay-Trail E3845
OS: Windows 10 1709 64bit
my device acpi description:
DefinitionBlock (
"pca9555.aml", // Output filename
"SSDT", // Signature
0x05, // DSDT Revision, needs to be 2 for 64bit
"OVIT", // OEMID
"AOI6", // TABLE ID
0x01 // OEM Revision
)
{
Scope (\_SB_)
{
//
// PCA9555 device, I2C expander(TI), 16 port gpio, interrupt capibility.
//
Device(PCA9)
{
Name(_ADR, 0)
Name(_HID, "PCA9555")
Name(_CID, "PCA9555")
Name(_UID, 1)
Method(_CRS, 0x0, NotSerialized)
{
Name(RBUF, ResourceTemplate()
{
// Sample I2C and GPIO resources. Modify to match your
// platform's underlying controllers and connections.
// \_SB.I2C and \_SB.GPIO are paths to predefined I2C
// and GPIO controller instances.
I2CSerialBus(0x20, ControllerInitiated, 400000, AddressingMode7Bit, "\\_SB.I2C1", , )
GpioInt(Level, ActiveHigh, Exclusive, PullDown, 0, "\\_SB.GPO2") {4}
})
Return(RBUF)
}
}
}
}
my device driver work ok with intel i2c controller driver 1.1.1.1004(2015.8.18), driver name is "I2C Controller",
when i upgrade the i2c controller drver to 10.1.1.38(2016.10.3), driver name is "Interl(r) atom/celeron/pentium processor serial IO(SIO) - I2C Port 1 - 0F41",
my device driver can not start, error code is 51, waiting for following device start: ACPI\80860F41\1, ACPI\INT33FC\3.
but the new I2C driver is started already.
Henry Ho.
Link Copied
0 Replies
![](/skins/images/872293744008A34B36F8ABF94A46CC66/responsive_peak/images/icon_anonymous_message.png)
Reply
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page