When running pcm as a docker container in a linux system of Model name: Intel(R) Core(TM) i5-10210U CPU @ 1.60GHz. Getting below errors even when i run it as a root. Used https://github.com/intel/pcm/blob/master/doc/DOCKER_README.md as reference.
Where as installing sudo apt install pcm and direct pcm command is running fine without issue. I want to use grafana output for monitoring.
===== Processor information =====
Linux arch_perfmon flag : yes
Hybrid processor : no
IBRS and IBPB supported : yes
STIBP supported : yes
Spec arch caps supported : yes
Max CPUID level : 22
CPU model number : 142
Number of physical cores: 4
Number of logical cores: 8
Number of online logical cores: 8
Threads (logical cores) per physical core: 2
Num sockets: 1
Physical cores per socket: 4
Last level cache slices per socket: 4
Core PMU (perfmon) version: 4
Number of core PMU generic (programmable) counters: 4
Width of generic (programmable) counters: 48 bits
Number of core PMU fixed counters: 3
Width of fixed counters: 48 bits
Nominal core frequency: 2100000000 Hz
IBRS enabled in the kernel : yes
STIBP enabled in the kernel : no
The processor is not susceptible to Rogue Data Cache Load: yes
The processor supports enhanced IBRS : yes
Package thermal spec power: 15 Watt; Package minimum power: 0 Watt; Package maximum power: 0 Watt;
opening /dev/mem failed: errno is 1 (Operation not permitted)
Can not read memory controller counter information from PCI configuration space. Access to memory bandwidth counters is not possible.
You must be root to access these SandyBridge/IvyBridge/Haswell counters in PCM.
INFO: Linux perf interface to program uncore PMUs is present
INFO: Secure Boot detected. Using Linux perf for uncore PMU programming.
Socket 0: 0 PCU units detected. 0 IIO units detected. 0 IRP units detected. 4 CHA/CBO units detected. 0 MDF units detected. 0 UBOX units detected. 0 CXL units detected. 0 PCIE_GEN5x16 units detected. 0 PCIE_GEN5x8 units detected.
Closed perf event handles
Trying to use Linux perf events...
Usage of Linux perf events is disabled through PCM_NO_PERF environment variable. Using direct PMU programming...
Starting plain HTTP server on http://localhost:9738/
PCM Error: someone has corrupted custom counter 0 on core 0 expected value 4399313 value read 0
PCM Error: someone has corrupted custom counter 1 on core 0 expected value 4392145 value read 0
PCM Error: someone has corrupted custom counter 2 on core 0 expected value 4395217 value read 0
PCM Error: someone has corrupted custom counter 0 on core 1 expected value 4399313 value read 0
PCM Error: someone has corrupted custom counter 1 on core PCM Error: someone has corrupted custom counter 01 expected value 4392145 value read 0 on core 6 expected value 4399313PCM Error: someone has corrupted custom counter 3PCM Error: someone has corrupted custom counter 0 on core 4 expected value 4399313 value read value read 0PCM Error: someone has corrupted custom counter 0 on core 5 expected value 4399313 value read 0
Sometimes seeing :
Zeroed PMU registers
Trying to use Linux perf events...
Usage of Linux perf events is disabled through PCM_NO_PERF environment variable. Using direct PMU programming...
WARNING: Custom counter 0 is in use. MSR_PERF_GLOBAL_INUSE on core 0: 0x800000000000000f
WARNING: Custom counter 1 is in use. MSR_PERF_GLOBAL_INUSE on core 0: 0x800000000000000f
WARNING: Custom counter 2 is in use. MSR_PERF_GLOBAL_INUSE on core 0: 0x800000000000000f
WARNING: Custom counter 3 is in use. MSR_PERF_GLOBAL_INUSE on core 0: 0x800000000000000f
WARNING: Core 0 IA32_PERFEVTSEL0_ADDR is not zeroed 1253585
Zeroed PMU registers
連結已複製
Hi Thomas,
I have tried both privilaged commands and command with limited capabilities without privilaged both leading to same error. Is there any other flags which should be set ?
No. I am not using. I do not see any tools using performance monitoring counters running.
