Wireless
Issues related to Intel® Wireless Adapters and technologies
Announcements
The Intel sign-in experience has changed to support enhanced security controls. If you sign in, click here for more information.
6564 Discussions

Intel AX200 failed to run INIT

MSD-Systems
Beginner
1,161 Views

Dear Deivid,

you have closed the old thread but i do not understand why.  You mentioned in the thread ubuntu 20.04 Intel ax200 Failed to run INIT ucode: -110  i have to check with the manufacture of the board.

Check the following with them:

 

1. PCIe clock request

2. PCIe reference clock

I am going to close this thread, for now. However, once the manufacturer provides you with any solution or information you can create a new thread and provide this one as a reference and we will continue with the support.

 

As already mentioned in the thread ubuntu 20.04 Intel ax200 Failed to run INIT ucode: -110 i have installed an Windows on it and the Module is working. Why should this be an Hardware issue when another OS is working?

 

Please provide me a feedback.

 

Many thanks for your support

0 Kudos
6 Replies
n_scott_pearson
Super User Retired Employee
1,147 Views

The driver has to load firmware onto the AX2xx card. If you see one working with Windows but not working with a particular Linux distro, then I would expect that the issue is the firmware being downloaded to the card. Try updating the driver in the distro.

Hope this helps,

...S

MSD-Systems
Beginner
1,101 Views

Hi,

 

this i have already tried. It is still the same windows works and linux not.

 

[ 1041.934865] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-cc-a0-64.ucode failed with error -2
[ 1041.935597] iwlwifi 0000:03:00.0: api flags index 2 larger than supported by driver
[ 1041.935622] iwlwifi 0000:03:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 89.3.35.37
[ 1041.936206] iwlwifi 0000:03:00.0: loaded firmware version 63.c04f3485.0 cc-a0-63.ucode op_mode iwlmvm
[ 1041.945983] iwlwifi 0000:03:00.0: Detected Intel(R) Wi-Fi 6 AX200 160MHz, REV=0x340
[ 1041.955121] thermal thermal_zone0: failed to read out thermal zone (-61)
[ 1042.961305] iwlwifi 0000:03:00.0: SecBoot CPU1 Status: 0x4, CPU2 Status: 0x1
[ 1042.961352] iwlwifi 0000:03:00.0: UMAC PC: 0xc00c0eb2
[ 1042.961386] iwlwifi 0000:03:00.0: LMAC PC: 0x0
[ 1042.961394] iwlwifi 0000:03:00.0: WRT: Collecting data: ini trigger 13 fired (delay=0ms).
[ 1042.990583] iwlwifi 0000:03:00.0: Start IWL Error Log Dump:
[ 1042.990595] iwlwifi 0000:03:00.0: Transport status: 0x00000042, valid: 976139064
[ 1042.990602] iwlwifi 0000:03:00.0: Loaded firmware version: 63.c04f3485.0 cc-a0-63.ucode
[ 1042.990608] iwlwifi 0000:03:00.0: 0xB24C89B5 | ADVANCED_SYSASSERT           
[ 1042.990616] iwlwifi 0000:03:00.0: 0x9D2DBFF8 | trm_hw_status0
[ 1042.990621] iwlwifi 0000:03:00.0: 0xC9694029 | trm_hw_status1
[ 1042.990626] iwlwifi 0000:03:00.0: 0xCE5F764A | branchlink2
[ 1042.990630] iwlwifi 0000:03:00.0: 0x6FEFFA22 | interruptlink1
[ 1042.990635] iwlwifi 0000:03:00.0: 0x791B61D2 | interruptlink2
[ 1042.990639] iwlwifi 0000:03:00.0: 0x120B1D4F | data1
[ 1042.990643] iwlwifi 0000:03:00.0: 0xF0A3DCAA | data2
[ 1042.990648] iwlwifi 0000:03:00.0: 0x5BA97162 | data3
[ 1042.990652] iwlwifi 0000:03:00.0: 0x76E5FCAF | beacon time
[ 1042.990656] iwlwifi 0000:03:00.0: 0x3DB8D951 | tsf low
[ 1042.990660] iwlwifi 0000:03:00.0: 0x38C2BB61 | tsf hi
[ 1042.990664] iwlwifi 0000:03:00.0: 0x8B706985 | time gp1
[ 1042.990668] iwlwifi 0000:03:00.0: 0x26D1926D | time gp2
[ 1042.990672] iwlwifi 0000:03:00.0: 0xA9AC5D94 | uCode revision type
[ 1042.990676] iwlwifi 0000:03:00.0: 0xC06E6FFE | uCode version major
[ 1042.990680] iwlwifi 0000:03:00.0: 0x58C45005 | uCode version minor
[ 1042.990685] iwlwifi 0000:03:00.0: 0x2EA5464D | hw version
[ 1042.990689] iwlwifi 0000:03:00.0: 0x9E6C085A | board version
[ 1042.990693] iwlwifi 0000:03:00.0: 0xA8E07D54 | hcmd
[ 1042.990697] iwlwifi 0000:03:00.0: 0xFE05F4AF | isr0
[ 1042.990701] iwlwifi 0000:03:00.0: 0x13DEFE10 | isr1
[ 1042.990705] iwlwifi 0000:03:00.0: 0x392FB36B | isr2
[ 1042.990708] iwlwifi 0000:03:00.0: 0x8C9AA1CF | isr3
[ 1042.990712] iwlwifi 0000:03:00.0: 0x3CEE91FF | isr4
[ 1042.990716] iwlwifi 0000:03:00.0: 0x8097EC80 | last cmd Id
[ 1042.990720] iwlwifi 0000:03:00.0: 0xE7A9CEB0 | wait_event
[ 1042.990724] iwlwifi 0000:03:00.0: 0x4778E5F1 | l2p_control
[ 1042.990728] iwlwifi 0000:03:00.0: 0x37F8E0FE | l2p_duration
[ 1042.990732] iwlwifi 0000:03:00.0: 0xAFF0F58B | l2p_mhvalid
[ 1042.990736] iwlwifi 0000:03:00.0: 0xDCC9671F | l2p_addr_match
[ 1042.990740] iwlwifi 0000:03:00.0: 0x5DCE722C | lmpm_pmg_sel
[ 1042.990744] iwlwifi 0000:03:00.0: 0x6D3FF744 | timestamp
[ 1042.990748] iwlwifi 0000:03:00.0: 0x578465C6 | flow_handler
[ 1042.990886] iwlwifi 0000:03:00.0: Start IWL Error Log Dump:
[ 1042.990890] iwlwifi 0000:03:00.0: Transport status: 0x00000042, valid: 7
[ 1042.990896] iwlwifi 0000:03:00.0: 0x20000066 | NMI_INTERRUPT_HOST
[ 1042.990900] iwlwifi 0000:03:00.0: 0x00000000 | umac branchlink1
[ 1042.990905] iwlwifi 0000:03:00.0: 0x8045541A | umac branchlink2
[ 1042.990909] iwlwifi 0000:03:00.0: 0x00000000 | umac interruptlink1
[ 1042.990914] iwlwifi 0000:03:00.0: 0x80437408 | umac interruptlink2
[ 1042.990918] iwlwifi 0000:03:00.0: 0x01000000 | umac data1
[ 1042.990922] iwlwifi 0000:03:00.0: 0x80437408 | umac data2
[ 1042.990926] iwlwifi 0000:03:00.0: 0x00000000 | umac data3
[ 1042.990930] iwlwifi 0000:03:00.0: 0x0000003F | umac major
[ 1042.990934] iwlwifi 0000:03:00.0: 0xC04F3485 | umac minor
[ 1042.990938] iwlwifi 0000:03:00.0: 0x000FB700 | frame pointer
[ 1042.990943] iwlwifi 0000:03:00.0: 0xC0887F40 | stack pointer
[ 1042.990947] iwlwifi 0000:03:00.0: 0x00000000 | last host cmd
[ 1042.990951] iwlwifi 0000:03:00.0: 0x00000000 | isr status reg
[ 1042.991051] iwlwifi 0000:03:00.0: IML/ROM dump:
[ 1042.991055] iwlwifi 0000:03:00.0: 0x00000003 | IML/ROM error/state
[ 1042.991187] iwlwifi 0000:03:00.0: 0x0000670A | IML/ROM data1
[ 1042.991294] iwlwifi 0000:03:00.0: 0x00000080 | IML/ROM WFPM_AUTH_KEY_0
[ 1042.991393] iwlwifi 0000:03:00.0: Fseq Registers:
[ 1042.991443] iwlwifi 0000:03:00.0: 0x60000000 | FSEQ_ERROR_CODE
[ 1042.991492] iwlwifi 0000:03:00.0: 0x80290021 | FSEQ_TOP_INIT_VERSION
[ 1042.991542] iwlwifi 0000:03:00.0: 0x00050008 | FSEQ_CNVIO_INIT_VERSION
[ 1042.991592] iwlwifi 0000:03:00.0: 0x0000A503 | FSEQ_OTP_VERSION
[ 1042.991642] iwlwifi 0000:03:00.0: 0x80000003 | FSEQ_TOP_CONTENT_VERSION
[ 1042.991692] iwlwifi 0000:03:00.0: 0x4552414E | FSEQ_ALIVE_TOKEN
[ 1042.991742] iwlwifi 0000:03:00.0: 0x00100530 | FSEQ_CNVI_ID
[ 1042.991791] iwlwifi 0000:03:00.0: 0x00000532 | FSEQ_CNVR_ID
[ 1042.991842] iwlwifi 0000:03:00.0: 0x00100530 | CNVI_AUX_MISC_CHIP
[ 1042.991893] iwlwifi 0000:03:00.0: 0x00000532 | CNVR_AUX_MISC_CHIP
[ 1042.991945] iwlwifi 0000:03:00.0: 0x05B0905B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM
[ 1042.991998] iwlwifi 0000:03:00.0: 0x0000025B | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR
[ 1042.992050] iwlwifi 0000:03:00.0: Failed to start RT ucode: -110
[ 1042.992057] iwlwifi 0000:03:00.0: WRT: Collecting data: ini trigger 13 fired (delay=0ms).

DeividA_Intel
Moderator
1,114 Views

Hello MSD-Systems, 



As you mentioned, this issue seems to be exclusively related to a specific OS. However, let check this once more in order to provide you a complete answer.


In the meantime, please try to check with Fujitsu (motherboard manufacturer) and provide us the outcome.




Regards,   


Deivid A. 

Intel Customer Support Technician 


MSD-Systems
Beginner
1,092 Views

Dear David,

please can you provide me more details around the error otherwise it will be hard to discuss with fujitsu about this topic.

best regards

DeividA_Intel
Moderator
1,082 Views

Hello MSD-Systems, 




I would like to inform you that the issue is under investigation and we'll provide you with updates within the next few days on your original post:


- https://community.intel.com/t5/Wireless/ubuntu-20-04-Intel-ax200-Failed-to-run-INIT-ucode-110/m-p/1266491#U1266491



I will proceed to close this thread since we are going to keep working on the original thread.




Regards,  


Deivid A. 

Intel Customer Support Technician 


MSD-Systems
Beginner
988 Views

Hi Deivid,

do have an update for me?

best regards

Michael

Reply