- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi, i am trying to do a pin assignment but by compile i get this Error Message:
"Error: Can't place multiple pins assigned to pin location Pin_AD25 ( IOC_X95_Y2_N1) Info: Pin iSW[7] is assigned to pin location Pin_AD25 (IOC_X95_Y2_N1) Info: Pin ~LVDS195p/nCEO~ is assigned to pin location Pin_AD25 (IOC_X95_Y2_N1) Error: Can't fit design in device" i don't know where thie Pin LVDS195p/nCEO is defined could someone help me? ThanksLink Copied
3 Replies
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Go to the Assignments menu > Device
Click on the "Device and Pin Options" button Go to the "Dual-Purpose Pins" tab Double click on nCEO Select "Use as regular I/O" By default nCEO is used as a programming pin (to chain several FPGAs during configuration). You need to tell Quartus that you want to use this pin as an I/O instead.- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
--- Quote Start --- Go to the Assignments menu > Device Click on the "Device and Pin Options" button Go to the "Dual-Purpose Pins" tab Double click on nCEO Select "Use as regular I/O" By default nCEO is used as a programming pin (to chain several FPGAs during configuration). You need to tell Quartus that you want to use this pin as an I/O instead. --- Quote End --- thank you for your answer
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Probably you defined an I/O differential standard (i.e.LVDS) on another pin which would need AD25 as its complementary.
Check pin assignment or in assignement editor for any reference to AD25 and to its complementary pin (LVDS195n, refer to your device datasheet) Cris
Reply
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page