Compilation Error on Ubuntu 18.04 for PAC_a10

[DongWang-BJTU]

I am trying to accelerate OpenCL applications by using PAC a10 card on a Ubuntu18.04 machine.

I have installed the BSP and corresponding componets form a10_gx_pac_ias_1_2_1_pv_dev.tar.

No Error were shown during installation.  But during compilation, the following error were shown in the quartus_sh_compile.log

It seems that the sdk fails to detect the correct OS type (Windows were detected).

My question is how to work around this Error on Ubuntu systems.

[EricMunYew_C_Intel]

Did you install kernel 4.15? May I know which document or tutorial you followed?

[DongWang-BJTU]

Yes, it is installed on Ubuntu 18.04 with kernel 4.15 (4.15.0-142-generic)。

I am following this guide "Intel Acceleration Stack Quick Start Guide for Intel Programmable Acceleration Card with Intel Arria 10 GX FPGA
" (https://www.intel.com/content/www/us/en/programmable/documentation/iyu1522005567196.html)

[EricMunYew_C_Intel]

Can you refer to below KDB:

https://www.intel.com/content/www/us/en/programmable/support/support-resources/knowledge-base/embedded/2019/error--packager-tool-failed-to-run.html