Application Acceleration With FPGAs
Programmable Acceleration Cards (PACs), DCP, FPGA AI Suite, Software Stack, and Reference Designs
Announcements
FPGA community forums and blogs on community.intel.com are migrating to the new Altera Community and are read-only. For urgent support needs during this transition, please visit the FPGA Design Resources page or contact an Altera Authorized Distributor.
504 Discussions

Generating AFU for Arria 10 GX PAC

AIvan11
Novice
2,563 Views

Hi,

I am trying to run minimal flow for the hello sample:

$ cd $OPAE_PLATFORM_ROOT/hw/samples/hello_afu $ afu_synth_setup --source hw/rtl/filelist.txt build_synth $ cd build_synth $ $OPAE_PLATFORM_ROOT/bin/run.sh

 

from:

https://www.intel.com/content/www/us/en/programmable/documentation/bfr1522087299048.html#unm1523051477085

to generate an AFU.

 

Synthesis fails with the following error. I googled it, but nothing comes up.

Error (19877): Partial reconfiguration no longer supports synthesis revisions Error: Flow failed: Error: Quartus Prime Synthesis was unsuccessful. 2 errors, 9 warnings Error: Peak virtual memory: 1279 megabytes Error: Processing ended: Wed Oct 10 14:45:57 2018 Error: Elapsed time: 00:00:08 Error (23035): Tcl error: ERROR: Error(s) found while running an executable. See report file(s) for error message(s). Message log indicates which executable was run last.   while executing "execute_module -dont_export_assignments -tool syn" (procedure "synthesize_persona_impl" line 14) invoked from within "synthesize_persona_impl $synth_rev" (procedure "compile_pr_revision" line 18) invoked from within "compile_pr_revision $options(impl)" (procedure "main" line 110) invoked from within "main" invoked from within "if {($::quartus(nameofexecutable) == "quartus") || ($::quartus(nameofexecutable) == "quartus_pro") || ($::quartus(nameofexecutable) == "qpro")} {   #..." (file "./a10_partial_reconfig/flow.tcl" line 1039)

Do you know what may be causing it? Thanks in advance.

0 Kudos
1 Solution
AIvan11
Novice
1,340 Views

Yes, thank you. Downgrading to 17.1 and installing the patches provided with the acceleration stack solved the error.

View solution in original post

0 Kudos
2 Replies
JohnT_Intel
Employee
1,340 Views

Hi,

 

From my understanding, you are using Quartus 18.0 or later version which is causing the issue. I would recommend you to use Quartus 17.1 Pro edition in order to compile your design.​

AIvan11
Novice
1,341 Views

Yes, thank you. Downgrading to 17.1 and installing the patches provided with the acceleration stack solved the error.

0 Kudos
Reply