Application Acceleration With FPGAs
Programmable Acceleration Cards (PACs), DCP, DLA, Software Stack, and Reference Designs
Announcements
Intel Support hours are Monday-Fridays, 8am-5pm PST, except Holidays. Thanks to our community members who provide support during our down time or before we get to your questions. We appreciate you!

Need Forum Guidance? Click here
Search our FPGA Knowledge Articles here.
424 Discussions

Need to download Intel Acceleration Stack Version 2.0 to upgrade firmware, but cannot find the link

HKim27
New Contributor I
536 Views

Hi, all.

I have Intel FPGA Programmable Acceleration Card D5005 with Firmware version 2.0 (Pre-Beta) (a9f2d0f3-b398-57b0-b34f-d226bf364fee).

 

The documentation says I had to upgrade v2.0 pre-beta to v2.0 before further steps. According to doc (https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/archives/ug-qs-ias-d5005...), I need the followings:

 

  1. Intel Acceleration Stack Version 2.0 (not 2.0.1)
  2. setup_fim_and_bmc.sh (maybe included in 1.)
  3. d5005_pac_ias_2_0_bmc.tar.gz (maybe included in 1.)

 

The web page(https://www.intel.com/content/www/us/en/programmable/solutions/acceleration-hub/archives-d5005.html) tells me to contact Intel to download Intel Acceleration Stack Version 2.0. I contacted them 3 times through the link, but they never responded.

 

Could you provide links to download the above 3 files?

 

 

0 Kudos
5 Replies
HRZ
Valued Contributor II
322 Views

You can probably forget about the pre-beta v2.0 and use the public stable v2.0.1:

 

https://www.intel.com/content/www/us/en/programmable/products/boards_and_kits/dev-kits/altera/intel-...

HKim27
New Contributor I
322 Views

As I mentioned, ​I have a card with old firmware (version 2.0, pre-beta).

To upgrade it into 2.0.1, I need Intel Acceleration Stack Version "2.0", not "2.0.1".

HRZ
Valued Contributor II
322 Views

Sorry, I didn't realize there are two steps to the firmware upgrade process (which sounds pretty strange to me). The Acceleration Stack v2.0 was never released to public as far as I know. The first public versions was v2.0.1. You might have better luck asking your point of contact which provided you with the board in the first place, or sending a request through the "Contact Intel" form here:

 

https://www.intel.com/content/www/us/en/programmable/solutions/acceleration-hub/archives-d5005.html

HKim27
New Contributor I
322 Views

If any Intel employee see this post, please provide me a point of contact for Intel Acceleration Stack 2.0.

Thanks in advance.

MEIYAN_L_Intel
Employee
322 Views

Hi,

You may need to contact local sale or FAE to have the Acceleration Stack v2.0.

Thanks

Reply