Do you have a new armeepromtool??

[MWang76]

I want to write the MAC address to i210 ethernet controller, and the platform is nvidia jetson xavier.

I use the armeepromtool_v0.6.7, but there is error message(bus error).

Can you help me?

thank you!

[Mike_Intel]

Hello MWang76, Thank you for posting in Intel Ethernet Communities. Let me clarify, are you trying to change the MAC address of the Intel I210 NIC card? If yes, may I know why are you trying to change the MAC address? Best regards, Michael L. Intel Customer Support Under Contract to Intel Corporation

[MWang76]

Hi MikeL_Intel,

I am a BSP engineer of Arm Product.

We have a new product that mount the I210 ethernet controller on it.

So, I need to rewrite the new MAC address to replace the default address.

[David_V_Intel]

Hello MWang76, Thank you for your response. I will proceed to move this thread to the embedded support where you will get the assistance you need. Regards, David V Intel Customer Support Technician Under Contract to Intel Corporation

[CarlosAM_INTEL]

Hello, @MWang76​:

Thank you for contacting Intel Embedded Community.

The Intel I210, I211, and X550 EEPROM Access Tool (EAT) version 0.7.3 document # 572162 is the updated version of the requested tool. It can be found when you are logged into your Resource & Design Center (RDC) privileged account at the following website:

http://www.intel.com/cd/edesign/library/asmo-na/eng/572162.htm

The RDC Account Support form is the channel to process your account update request. It can be found at:

https://www.intel.com/content/www/us/en/forms/design/contact-support.html

Best regards,

@Mæcenas_INTEL​.