Embedded Connectivity
Intel network controllers, Firmware, and drivers support systems
850 Discussions

Ethernet Controller I350-AM4

YB
Novice
1,883 Views

Hi,

Can I know what is the polarity of ethernet controller I350-AM4 in the material belt?

Thank you.

0 Kudos
1 Solution
CarlosAM_INTEL
Moderator
1,796 Views

Hello, @YB:

Thanks for your reply.

You should find the information that may help you in sections  10.2.1.3 and 10.4, on pages 10-22, 10-23, 10-24, and 10-25 of chapter 10 of the Intel Packaging Databook that can be found on the following website:

https://www.intel.com/content/dam/www/public/us/en/documents/packaging-databooks/packaging-chapter-10-databook.pdf

Best regards,

@CarlosAM_INTEL.

View solution in original post

0 Kudos
8 Replies
Mike_Intel
Moderator
1,861 Views

Hello YB,


Thank you for posting in Intel Ethernet Communities. 


For us to further check your inquiry or route you to the correct team who can provide the information that you are requesting.

I just want to clarify, are you designing a system with embedded I350-AM4?


If you have questions, please let us know. In case we do not hear from you, we will make a follow up after 3 workings days. Thank you.


Best regards,

Michael L.

Intel® Customer Support Technician


0 Kudos
YB
Novice
1,857 Views

Hi Michael,

Yes, our customer that inquired on this has project with I350-AM4.

Thank you.

0 Kudos
Mike_Intel
Moderator
1,851 Views

Hello YB,


Base on your inquiry, we have specific forum for these issues and I will be transferring this thread for faster response. 

Thank you.


Best regards,

Michael L.

Intel® Customer Support Technician


0 Kudos
CarlosAM_INTEL
Moderator
1,819 Views

Hello, @YB:

Thank you for contacting Intel Embedded Community.

You can find the information that may help you in section 1.2, on page 6 of the Intel® Ethernet Controller I350: Specification Update document # 303366. You can find it when you are logged into your Resource & Design Center (RDC) privileged account on the following website:

https://cdrdv2.intel.com/v1/dl/getContent/303366

The RDC Account Support form is the channel to process your account update process or report any problems with the provided sites. You should fill out the form stated on the following website:

https://www.intel.com/content/www/us/en/forms/support/my-intel-sign-on-support.html

Best regards,

@CarlosAM_INTEL.

0 Kudos
YB
Novice
1,804 Views

Hi,

Is there any document that I can get the tape and reel packaging drawing of I350-AM4?

Below is the example of the drawing.

YB_0-1618361910368.jpeg

Thank you.

0 Kudos
CarlosAM_INTEL
Moderator
1,797 Views

Hello, @YB:

Thanks for your reply.

You should find the information that may help you in sections  10.2.1.3 and 10.4, on pages 10-22, 10-23, 10-24, and 10-25 of chapter 10 of the Intel Packaging Databook that can be found on the following website:

https://www.intel.com/content/dam/www/public/us/en/documents/packaging-databooks/packaging-chapter-10-databook.pdf

Best regards,

@CarlosAM_INTEL.

0 Kudos
YB
Novice
1,787 Views
0 Kudos
CarlosAM_INTEL
Moderator
1,771 Views

Hello, @YB :

You are welcome.

Please do not hesitate to contact us if you have any questions related to Intel Embedded products.

Best regards,

@CarlosAM_INTEL.

0 Kudos
Reply