Embedded Connectivity
Intel network controllers, Firmware, and drivers support systems
公告
FPGA community forums and blogs on community.intel.com are migrating to the new Altera Community and are read-only. For urgent support needs during this transition, please visit the FPGA Design Resources page or contact an Altera Authorized Distributor.
912 讨论

How to program I210-AT at ICT HP3070 platform?

WKng
初学者
5,495 次查看

Hi Intel team,

We are using "WGI210AT S LJXR" chipset on our custom board. How to program MAC address on ICT HP3070 platform? 

0 项奖励
9 回复数
Adolfo_S_Intel
主持人
5,472 次查看

Hello, @WKng 

 

The Intel I210 Frequently Asked Questions, especially questions 2.14 to 2.16 will be useful for your case.

 

Bear in mind that some of those document numbers mentioned might require Intel Developer Zone Premium access to the Intel RDC.

 

Best Regards,

@Adolfo_S_Intel 

0 项奖励
WKng
初学者
5,453 次查看

Hi @Adolfo_S_Intel,

 

No, We still no idea how to program MAC address into I210-AT chipset (Flash-less mode) at ICT HP3070 platform.

Please advise the wiring connection and step by step programming and verification steps.

FYI, We not yet install the single board computer onto our custom board during in-circuit test.

 

Regards,

WK NG

0 项奖励
Adolfo_S_Intel
主持人
5,437 次查看

Hello @WKng,

 

I send you an e-mail with additional information about this issue.

 

Best Regards,

@Adolfo_S_Intel 

0 项奖励
1wersdfs
初学者
5,271 次查看

hi Adolfo,

Can you email me the same instructions that you forwarded.  i would like to change the device id on i210 device on ICT fixture.

thanks

-Josh

0 项奖励
CarlosAM_INTEL
主持人
5,118 次查看

Hello,  @1wersdfs :

Thank you for contacting Intel Embedded Community. 

We have sent an email to the address related to this account with information that may help you.

Best regards,

@CarlosAM_INTEL.

0 项奖励
mwm
初学者
4,902 次查看

Hi Adolfo,

 

Can you please email me the same instructions that you forwarded. we would like to program i210AT @ ICT fixture.

 

Thanks

Mike

0 项奖励
CarlosAM_INTEL
主持人
4,894 次查看

Hello, @mwm:

Thank you for contacting Intel Embedded Community.

You need to update your account to the premier option. You should fill out the form stated on the following website:
https://www.intel.com/content/www/us/en/forms/developer/premier-registration.html 
You should use a business email address to evade any inconvenience. Please avoid the free email provider's address (such as the provided by Hotmail, Gmail, Yahoo, or others).
Best regards,

@CarlosAM_INTEL.

0 项奖励
WKng
初学者
5,376 次查看

Hi @Adolfo_S_Intel,

 

Noted and thanks.

 

Regards,

WK NG

0 项奖励
WKng
初学者
5,179 次查看

Hi @Adolfo_S_Intel,

 

I couldn't find the product - I210-AT when creating new case.

I only saw FPGA & SSD in All Intel Product.

I tried create my case under Cyclone FPGA but didn't received any reply.

I210-AT not found.JPG

Regards,

WK NG

0 项奖励
回复