Embedded Connectivity
Intel network controllers, Firmware, and drivers support systems
Объявления
FPGA community forums and blogs on community.intel.com are migrating to the new Altera Community and are read-only. For urgent support needs during this transition, please visit the FPGA Design Resources page or contact an Altera Authorized Distributor.
912 Обсуждение

How to program I210-AT at ICT HP3070 platform?

WKng
Начинающий
5 376Просмотр.

Hi Intel team,

We are using "WGI210AT S LJXR" chipset on our custom board. How to program MAC address on ICT HP3070 platform? 

0 баллов
9 Ответы
Adolfo_S_Intel
Модератор
5 353Просмотр.

Hello, @WKng 

 

The Intel I210 Frequently Asked Questions, especially questions 2.14 to 2.16 will be useful for your case.

 

Bear in mind that some of those document numbers mentioned might require Intel Developer Zone Premium access to the Intel RDC.

 

Best Regards,

@Adolfo_S_Intel 

WKng
Начинающий
5 334Просмотр.

Hi @Adolfo_S_Intel,

 

No, We still no idea how to program MAC address into I210-AT chipset (Flash-less mode) at ICT HP3070 platform.

Please advise the wiring connection and step by step programming and verification steps.

FYI, We not yet install the single board computer onto our custom board during in-circuit test.

 

Regards,

WK NG

Adolfo_S_Intel
Модератор
5 318Просмотр.

Hello @WKng,

 

I send you an e-mail with additional information about this issue.

 

Best Regards,

@Adolfo_S_Intel 

1wersdfs
Начинающий
5 152Просмотр.

hi Adolfo,

Can you email me the same instructions that you forwarded.  i would like to change the device id on i210 device on ICT fixture.

thanks

-Josh

CarlosAM_INTEL
Модератор
4 999Просмотр.

Hello,  @1wersdfs :

Thank you for contacting Intel Embedded Community. 

We have sent an email to the address related to this account with information that may help you.

Best regards,

@CarlosAM_INTEL.

mwm
Начинающий
4 783Просмотр.

Hi Adolfo,

 

Can you please email me the same instructions that you forwarded. we would like to program i210AT @ ICT fixture.

 

Thanks

Mike

CarlosAM_INTEL
Модератор
4 775Просмотр.

Hello, @mwm:

Thank you for contacting Intel Embedded Community.

You need to update your account to the premier option. You should fill out the form stated on the following website:
https://www.intel.com/content/www/us/en/forms/developer/premier-registration.html 
You should use a business email address to evade any inconvenience. Please avoid the free email provider's address (such as the provided by Hotmail, Gmail, Yahoo, or others).
Best regards,

@CarlosAM_INTEL.

WKng
Начинающий
5 257Просмотр.

Hi @Adolfo_S_Intel,

 

Noted and thanks.

 

Regards,

WK NG

WKng
Начинающий
5 060Просмотр.

Hi @Adolfo_S_Intel,

 

I couldn't find the product - I210-AT when creating new case.

I only saw FPGA & SSD in All Intel Product.

I tried create my case under Cyclone FPGA but didn't received any reply.

I210-AT not found.JPG

Regards,

WK NG

Ответить