I have a Intel Atom Board with a GPIO Connector available (http://www.intel.com/content/www/us/en/intelligent-systems/queens-bay/embedded-intel-atom-e6xx-serie... Embedded Intel® Atom™ Processor E6xx Series with Intel® PCH EG20T). Can anyone provide guidance on how I would go about using these GPIO pins in a managed language (C# preferred)- I would like to set the pins on/off or read values from the pins (use for both input and output). Is there any easy way to do this without having to write my own driver/recreate the wheel? Ive read the programming guide, but with no samples/working code to start with, Ive been scratching my head. Only threads Ive found online have been unanswered.
The document mentioned is the programming guide I had mentioned in my question. Are there any other resources out there to facilitate working with the GPIO driver (samples/working code, etc)
I was facing similiar issue and found something on this ftp server:
The folder IOH_Win7_Drivers_V110_110620.zip\IOH_Win7_Drivers_V110_110620\Develop\driver\General\TESTAPP
contains a test application which makes use of all EG20T functions (CAN controller, GPIO etc).
Hi, Ely! We will be addressing this in another thread: /message/11589?et=watches.email.thread# 11589 https://embedded.communities.intel.com/message/11589?et=watches.email.thread# 11589
Hi, Ely. The information you requested in classified as Intel Confidential. I am following up on your application and will keep you posted in the other thread. Thanks! LynnZ.