Embedded Intel Atom® Processors
Technological Conversations about Intel Atom® Hardware, Software, Firmware, Graphics
1149 Discussions

HW and Firmware documentation for ATOM ISP 2 (Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Imaging Unit).

PGfel
Beginner
2,790 Views

Dear Intel-Support,

 

we have started to finish the work on an ATOM ISP2 driver for the linux kernel. The work was started a few years ago, but was never finished. To be able to complete and troubleshoot the driver we would need access to the HW & Formware documentation (only to the extend, that is required for driver development). The device identifies itself as Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Imaging Unit with an OV2680 camera unit. It would be highly appreciated if you could help out the community with the required documents. I would be happy to sign a NDA in case those documents are confidential.

 

thank you and with kind regards,

Patrik Gfeller

0 Kudos
1 Solution
CarlosAM_INTEL
Moderator
2,678 Views

Hello, @PGfel​:

 

Thanks for your update.

 

Your request should be addressed by filling out the form stated in the following website:

 

https://software.intel.com/en-us/firmware/contact-us

 

Best regards,

@Mæcenas_INTEL​ 

View solution in original post

5 Replies
CarlosAM_INTEL
Moderator
2,678 Views

Hello, @PGfel​:

 

Thank you for contacting Intel Embedded Community.

 

The Intel Pentium Celeron Processor N3000 Family Intel Atom X5 E8000 processor Intel ISP Firmware and Driver for Linux Release Notes document # 566199 has information that may help you. This document can be found when you are logged into your Resource & Design Center (RDC) privileged account on the following websites:

 

http://www.intel.com/cd/edesign/library/asmo-na/eng/566199.htm

 

The rest of the documents for the listed processors can be found when you are logged into your RDC privileged account as well at:

 

https://www.intel.com/content/www/us/en/design/products-and-solutions/processors-and-chipsets/braswell/technical-library.html

 

The RDC Account Support form is the channel to process your account update request or any inconvenience related to the provided websites. It can be found at:

 

https://www.intel.com/content/www/us/en/forms/support/my-intel-sign-on-support.html

 

We suggest you use a business email address to evade any inconvenience. Please avoid the free email provider's address (such the provided by Hotmail, Gmail, Yahoo, or others).

 

Best regards,

@Mæcenas_INTEL​.

PGfel
Beginner
2,678 Views

Dear @Mæcenas_INTEL​ ,

 

thank you for your reply, much appreciated. I've requested access to Resource & Design Center (RDC), as it is not for my office work I've used by private gmail address. I hope this will work - otherwise I'll ask my boss if I can use the work mail for this.

 

The current driver implementation uses the following firmware for the ISP:

shisp_2401b0_v21.bin

 

Unfortunately we could not find this version. Can you provide a copy of the respective firmware file?

 

It is not exactly the same topic, so let me know if I shall open a new thread.

 

with kind regards,

Patrik

0 Kudos
CarlosAM_INTEL
Moderator
2,679 Views

Hello, @PGfel​:

 

Thanks for your update.

 

Your request should be addressed by filling out the form stated in the following website:

 

https://software.intel.com/en-us/firmware/contact-us

 

Best regards,

@Mæcenas_INTEL​ 

PGfel
Beginner
2,678 Views

Hello @Mæcenas_INTEL​ ,

 

thank you for your help - it is much appreciated. I'll follow up regarding the documentation with RDC and send a request for the firmware via the form provided.

 

For me it is ok to mark the case as resolved (as I have the contact points to follow up).

 

with kind regards,

Patrik Gfeller

 

0 Kudos
CarlosAM_INTEL
Moderator
2,678 Views

Hello, @PGfel​:

 

Thanks for your reply and feel free to mark this thread with your feedback whenever is good for you.

 

We are glad that our suggestion are useful to you.

 

Best regards,

@Mæcenas_INTEL​.

0 Kudos
Reply