Intel Xeon D-1518 / Intel Xeon D-1521 - GFLOPS ( APP )

[TAumü]

Hello,

I have to calclulate the peak FLOPs for our SoC server system for export declaration

We use Intel Xeon D 1518 and Intel Xeon D 1521.

For Vector Processor Wi = 0.9 for non Vector Processor Wi = 0.3

Ti = cycletime of the CPU 

Ri / FPO/Ti 

APP = W1 x (FPO/TI) + W2 x (FPO/TI) + W3 x (FPO/TI) + W4 x (FPO/TI)

I need a datasheet of both CPU were the Flop per second and core are mentioned

Best Regards

Thomas

[JoseH_Intel]

Hello TAumü,

Thank you for joining the community.

For general information about the Xeon D family processors you can go to ark.intel.com. For technical and design information your need to post your question under the Embedded Community. I will try to transfer this thread to the Embedded Community

Regards

Jose A.

Intel Customer Support Technician

Under Contract to Intel Corporation

[CarlosAM_INTEL]

Hello, @TAumü​:

Thank you for contacting Intel Embedded Community.

The information that may help you and the channels that you should contact to address this type of questions can be found at the following website:

https://www.intel.com/content/www/us/en/support/articles/000005755/processors.html

Best regards,

@Mæcenas_INTEL​.