Slimbootloader MR8 FspDbg.bin Does NOT Produce Debug Information

[Siddhartha]

https://community.intel.com/t5/Processors/Slimbootloader-MR8-FspDbg-bin-Does-NOT-Produce-Debug-Information/m-p/1522495#M65241

Hi.

Our original post is at the link above. @Jocelyn_Intel redirected us to the Intel Developer Zone.

Please advise.

Thanks.

[Siddhartha]

Hi.

We solved this problem as follows:

    1. Apparently, we had used some incorrect binaries in the Flash Image Tool (FIT) after build & stitch.

        1.1. Once we corrected this mistake, debug messages appeared.

Slimboot proceeds as shown in the attachment (EarlyCmdTrainingFailed.txt).

    What must be done to get past the error shown in the attachment ?

Thanks.

[Diego_INTEL]

Hello @Siddhartha,

Thank you for contacting Intel Embedded Community.

And my apologies for the late reply. Which binaries have you used for the FIT and which processor are you using?

Best regards,

@Diego_INTEL 

[Siddhartha]

@Diego_INTEL 

Hi Diego.

Sorry for the delayed reply - we had a long weekend & I made it back to the office only today.

Like I mentioned in my linked post, we use the i7 processor.

Anyway, we were able to go past even the Early Command Training error by changing a Slimboot configuration file.

So our issue is solved.

Thanks.

[Diego_INTEL]

Hello @Siddhartha,

Don't worry, I'm glad that you could solve the issue. 

Best regards,

@Diego_INTEL