Slimbootloader MR8 FspDbg.bin Does NOT Produce Debug Information

Siddhartha · ‎09-12-2023

Hi.

Our original post is at the link above. @Jocelyn_Intel redirected us to the Intel Developer Zone.

Please advise.

Thanks.

Siddhartha · ‎09-13-2023

Hi.

We solved this problem as follows:

1. Apparently, we had used some incorrect binaries in the Flash Image Tool (FIT) after build & stitch.

1.1. Once we corrected this mistake, debug messages appeared.

Slimboot proceeds as shown in the attachment (EarlyCmdTrainingFailed.txt).

What must be done to get past the error shown in the attachment ?

Thanks.

Diego_INTEL · ‎09-17-2023

Thank you for contacting Intel Embedded Community.

And my apologies for the late reply. Which binaries have you used for the FIT and which processor are you using?

Best regards,

Siddhartha · ‎09-19-2023

Hi Diego.

Sorry for the delayed reply - we had a long weekend & I made it back to the office only today.

Like I mentioned in my linked post, we use the i7 processor.

Anyway, we were able to go past even the Early Command Training error by changing a Slimboot configuration file.

So our issue is solved.

Thanks.

Diego_INTEL · ‎09-19-2023

Don't worry, I'm glad that you could solve the issue.

Best regards,