Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Beginner
202 Views

Advanced Proset functionality missing from device manager tab of X722.

Jump to solution

2019-07-11_16-24-57.jpgI have two servers. One with an Intel S2600STQ motherboard, which has two X722 network adapters integrated into it. The other has an add-in X550-T2 network adapter.

 

Both have the Proset portions of the drivers installed.

 

The X722 driver is missing the advanced properties of the Proset software. Specifically the screen at , properties > advanced > Virtualization > Properties. Which shows current VMQ and SR-IOV ports which is attached.

 

Is there any way to get this functionality on the X722 adapters, or to retrieve this information using the Intel powershell commands? I haven't been successful at that route either yet.

 

Thanks!

 

 

 

 

0 Kudos

Accepted Solutions
Highlighted
8 Views

Hello Rob,

 

 Please be informed that as per the link below. Windows* 8.1 and Windows Server* 2012 R2 are the last operating systems to support the Intel PROSet command-line utilities.

 

So for the rest of the guide, please open this link:

https://www.intel.com/content/www/us/en/support/articles/000005778/network-and-i-o/ethernet-products...

 

If you still have questions, please let us know.

 

Best regards,

Michael L.

Intel Customer Support Technicians

A Contingent Worker at Intel

 

View solution in original post

0 Kudos
8 Replies
Highlighted
8 Views

Hello Rob,

 

Thank you for posting in Intel Ethernet Communities. 

 

For me to understand the issue, please provide the following details.

 

  1. What is your OS?
  2. What is the driver version installed?
  3. What feature are you trying to configure?

 

If you have questions, Please let us know.

 

Best regards,

Michael L.

Intel Customer Support Technicians

A Contingent Worker at Intel

0 Kudos
Highlighted
8 Views

Hello Rob,

 

I just want to make a follow up on the following information the I requested.

 

  1. What is your OS?
  2. What is the driver version installed?
  3. What feature are you trying to configure?

 

If you have questions, Please let us know.

 

Best regards,

Michael L.

Intel Customer Support Technicians

A Contingent Worker at Intel

0 Kudos
Highlighted
Beginner
8 Views

The operating system is Server 2019 Datacenter.

It appears that screen is in the old version of the driver and not the newer 1.10.130.0 driver release on 5/29/19.

Specifically I'm trying to make sure that the virtual machines are attaching to VMQ ports correctly in this new driver.

0 Kudos
Highlighted
9 Views

Hello Rob,

 

 Please be informed that as per the link below. Windows* 8.1 and Windows Server* 2012 R2 are the last operating systems to support the Intel PROSet command-line utilities.

 

So for the rest of the guide, please open this link:

https://www.intel.com/content/www/us/en/support/articles/000005778/network-and-i-o/ethernet-products...

 

If you still have questions, please let us know.

 

Best regards,

Michael L.

Intel Customer Support Technicians

A Contingent Worker at Intel

 

View solution in original post

0 Kudos
Highlighted
8 Views

Hello Rob,

 

I just want to check if you already tried the guide that we provided. 

If you still have questions, please let us know.

 

Best regards,

Michael L.

Intel Customer Support Technicians

A Contingent Worker at Intel

 

0 Kudos
Highlighted
Beginner
8 Views

I was able to download the proset powershell functions and figure out what I needed.

0 Kudos
Highlighted
8 Views

Hello Rob,

 

Thank you for the update. If you still have questions, please let us know.

 

Best regards,

Michael L.

Intel Customer Support Technicians

A Contingent Worker at Intel

 

0 Kudos
Highlighted
8 Views

Hello Rob,

 

Just checking if you still need assistance, just let us know.

 

Best regards,

Michael L.

Intel Customer Support Technicians

A Contingent Worker at Intel

0 Kudos