I need eepromARMtool to modify the MAC address of i210 and E810

[liangmeiLiu]

Dear support team,

Where can I find the eepromARMtool source code? I am working on an ARM based board that uses an i210 and E810. I would like to program the spi flash via this tool so that I can edit mac address.

My email is <email removed> , pls sent it to me, thanks.

[Sazirah]

Hi liangmeiLiu,

Thank you for posting in Intel Ethernet Communities.

Regarding this enquiry, please be inform that I do not have sufficient information from my end. Therefore, I would advise you to contact our Intel Embedded team by posting a question at https://community.intel.com/t5/Embedded-Connectivity/bd-p/embedded-networking-connectivity. They will be able to assist you as they are more expert on this issue.

Since there is nothing much I can assist you, we will proceed with archiving this case at our end.

Thank you for using Intel products and services.

Regards,

Sazzy_Intel 

Intel Customer Support Technician

[CarlosAM_INTEL]

Hello,  @Sazirah:

Thank you for contacting Intel Embedded Community.

We need to clarify that this forum is not related to an Intel Embedded Platform (it is related to an ARM implementation) and it is related to the Intel® Ethernet Controller I210.

Due to this, the customer request is out of our scope of support.

Please consider this information when you provide the previous suggestion, or transfer any forums to the channel that you mentioned in your previous communication.

Best regards,

@CarlosAM_INTEL.

[liangmeiLiu]

Hi Sazzy,

As Carlos mentioned, could you provide me with the eepromARMtool? Alternatively, could you guide me on how to modify the MAC address for the E810 and I210 network controllers under the ARM architecture?