- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I use dpdk and pktgen-dpdk to test the performance of the platform performance .
The system configuration as follows:
Senders: Intel i5-6600k with two sumsang ddr4 drams (dual channel), one intel XL710 40G NIC.
Command: ./pktgen -C 0xf -n 2 -- -P -m "2.0,3.1"
The packet size set to 64 bytes.
Receiver: Intel i5-660k with two sumsang ddr4 drams(dual channel), one intel XL710 40G NIC.
Command: ./testpmd -C 0xf -n2 -- -i --portmask=0x3 --coremask=0xc
However, when starting to forward the packets, if I use the internal video card, the pktgen will stop after sending severl thousands packets .
Link Copied
2 Replies
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Wyf,
Thank you for posting in Intel Ethernet Communities. Since this involves DPDK please check with Intel Premier Support using the following link.
https://www.intel.com/content/www/us/en/design/support/ips/training/access-and-login.html
Let us know if you have any other questions.
Best regards,
Daniel D
Intel Customer Support
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Wyf,
Please let us know if you were able to get assistance from Intel Premier Support regarding DPDK. Let us know if you have any other questions.
Best regards,
Daniel D
Intel Customer Support

Reply
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page