Hello ！I want to implementate a transceiver on de5-net board!Now there are some problems,in my projects debuging.
my instant of low latency phy is configured as: standard datapath, duplex mode,6000Mbps data rate, and the refclk is 150MHz,pll is ATX PLL, fpga-to-pcs width is 40.
when i reset the phy ip,the tx_ready is pull high,but rx_ready never asserts,and the pll_locked just stay high for a clock
period.My signaltap clock is rx_clkout of low latency phy ip.
