FPGA Intellectual Property
PCI Express*, Networking and Connectivity, Memory Interfaces, DSP IP, and Video IP
6343 Discussions

No response when alpplying write on avl_mm port when using generic serial flash interface IP

Kavin
New Contributor I
536 Views

when I apply memory write with generic serial flash interface IP,there is no response on QSPI physical pins,but these pins response correctly when applying write enable or memory read. 

 

0 Kudos
1 Solution
Kavin
New Contributor I
524 Views

Hi

Thanks,the problem is solved.In my design ,the burstcount default value is 0 and i forgot to change it's value.

View solution in original post

0 Kudos
4 Replies
Kavin
New Contributor I
535 Views

what is the right step to apply  memory write?

0 Kudos
YuanLi_S_Intel
Employee
527 Views

Hi,


You may refer to the user guide at below for the steps to perform write operation:

https://www.intel.com/content/www/us/en/programmable/documentation/tkt1520669802999.html#aog1522582064422


Thank You


0 Kudos
Kavin
New Contributor I
525 Views

Hi

Thanks,the problem is solved.In my design ,the burstcount default value is 0 and i forgot to change it's value.

0 Kudos
YuanLi_S_Intel
Employee
489 Views

I am glad it is solved now


0 Kudos
Reply