SDI Megacore refclk_rate

Altera_Forum · ‎10-11-2011

In the v11 SDI userguide it describes the new signal refclk_rate with the following:

refclk_rate : Input : Set input 0 for a 148.35-MHz RX serial reference clock and input 1

for 148.35-MHz RX serial reference clock.

Ok, so what do I set it to for 148.5MHZ ref clock?:confused:

Cheers,

Simon

Altera_Forum · ‎10-11-2011

i filed an SR on this:

Below statement is the corrected one.

Set input 0 for a 148.35-MHz RX serial reference clock and input 1 for 148.5-MHz RX serial reference clock.

Altera_Forum · ‎10-12-2011

Thanks! That seems to work.