Dear Sir,
just before 15 days we got ARRIA10GX development kit .
1.We connected bitec FMC HDMI connector RECEIVER sink to PC GPU GTX1050.
and connected 4k tv to the transmitter side.
when we loaded the precompiled sof file to the kit --- in nvide control panel its detecting the arria10gx card. but there is no display on source -4K TV.
we installed quartus prime 17.1 pro and the desing is
AN 776: Intel® Arria® 10 UHD Video Reference Design.
2. we have to use HDMI RX AND TX IP CODE DDR4 MEMORY WITH SOME LOGIC TO BE IMPLEMENTED IN THE CODE . I know vhdl language. not familiar verilog.
also not familiar with NIOS2 . SO FOR IMPLEMENTATION OF OUR LOGIC
3. the fpga is arria10gx a10x115S24I1SG
BITEC HDMI FMC DAUGHTER CARD REV 11
Quartus pro 17.1 we are using .
4. for daughter card rev11 any of quartus pro edition will work ?
WHICH IP CORES I HAVE TO USE .
