Bootrom debug ： failed to find spl in emmc CycloneVsoc

[CAlex]

Hi

I'm using a SoM based on cycloneVSOC.

There is an EMMC.

I want to boot from emmc flash with a SPL and a baremetal binary.

I used the same build flow on rocketboards(HWLIB) to build my image.

And use ums 0 mmc 0 to mount the emmcblk to /dev/sda.

Then I used the order : dd if=SD_imga.img of=/dev/sda then reset.

But it failed

following is the reg from the sysmgr:

Could you please tell me why it is failed?

Reguards

Alex

[Jeet14]

Hi Alex,

I have checked internally on this with other teams.

Unfortunately, we don't have any documentation or steps for BareMetal application booting from eMMC on cyclone V.

So, unable to support on this case.

Regards

Tiwari

[Jeet14]

Please login to ‘https://supporttickets.intel.com/s/?language=en_US’, view details of the desire request, and post a feed/response within the next 15 days to allow me to continue to support you. After 15 days, this thread will be transitioned to community support. The community users will be able to help you on your follow-up questions.