PCB design guidance fr DE10 Lite

[YigalB1]

I would like to design a PCB that will be plugged into DE10 Lite board.

Is there a reference design that can be used with the exact pins locations, sizes and text?

Both of the GPIO header and the Arduino connector. 

[FvM · Accepted solution]

Hi,

Arduino UNO R3 (Arduino classic) shield designs are widely available on the net, e.g. here Hardware | Arduino Documentation They provide Autodesk Eagle design that can be also imported in KiCAD.

Terasic DE10-Lite page shows a number of suggested GPIO connector applications, mostly using IDC cable. https://www.terasic.com.tw/cgi-bin/page/archive.pl?Language=English&CategoryNo=234&No=1021&PartNo=2#contents

Regards
Frank