Terasic ARRIA 10 SOC development board I want to use this board with TI's AFE7444EVM, is there a way to get FMC compatibility between them?

[JJaco16]

TI's AFE7444EVM has a 560 pin FMC connector which connects to a TSW14J57EVM which has an ARRIA10 FPGA.

I want to use the AFE7444EVM with the ARRIA10 SOC development board , which has two 400 pin FMC connectors. Is their a way to interface the two boards? or any daughter card that will aid me in this?

For reference I've attached the links for AFE7444EVM and ARRIA 10 SOC development board

AFE7444EVM :

http://www.ti.com/lit/ug/slau783/slau783.pdf

ARRIA 10 SOC development board :

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug-a10-soc-devkit.pdf

[EBERLAZARE_I_Intel]

Hi,

I am not sure if you can connect them as the pins connection varies between those two FMC connectors.

Why did you want to use the Arria 10 SoC instead of the documented TSW14J57EVM board?

Regards.