USB3 on a10_soc_devkit

[dsun01]

Hi Intel/Altera FPGA expert,

I am working on a project to port a TI TSW14J56EVM (which is based on Arria 5, the key blocks are JESD, and USB3) to Arria 10.  A good candidate is A10_soc_devkit, it has FMC port that support JESD, but it doesn't have a USB3 physical connection. any suggestion to implement a USB3 on this board, or any other open source board that provide schematic and layout design files that support both JESD and USB3. 

Sincerely, 

David 

[CheePin_C_Intel · Accepted solution]

Hi,

As I understand it, you have some inquiries related to implementing USB 3.0 in the A10 SOC devkit. For your information, we support USB solution through our design partner. You may further engage with SLS at info@slscorp.com for further details on the USB support. Note that there will be charges for the solution.

Please let me know if there is any concern. Thank you.

Best regards,

Chee Pin

[dsun01]

thank you very much, we are evaluating go to PCIe directly. if it works, we don't need USB3, the bandwidth is not enough. 

[Pritesh]

Hi,

This is Pritesh from SLS. I am writing this if you are still looking for FMC board to implement USB3 interface on A10 SoC Kit. If yes, please visit the product webpage https://www.slscorp.com/products/fmc-snap-on-boards/eusb-3-1-fmc.html for more information. Also, feel free to write your feedback here.

Regards,

Pritesh Kukadia

[CheePin_C_Intel]

Hi,

Thanks for your update.

[CheePin_C_Intel]

Hi,

As I understand it, it has been some time since I last heard from you. This thread will be transitioned to community support. If you have a new question, feel free to open a new thread to get the support from Intel experts. Otherwise, the community users will continue to help you on this thread. Thank you.