de10 nano

[ali27]

when setting up a de10 nano do i have to download the quartus software on to the fpga board or can i have it on my personal device and send the program via a usb blaster to the fpga board 

[sstrell]

Quartus runs on a PC, not the FPGA.  It generates a programming file (.sof by default) that is sent to the FPGA via USB Blaster to the device's JTAG port to program the device.

[NazrulNaim_Intel]

We sincerely apologize for the inconvenience caused by the delay in addressing your Forum queries. Due to an unexpected back-end issue in our system, your Forum cases, along with others, did not get through as intended. As a result, we have a backlog of cases that we are currently working through one by one.

Please be assured that we are doing everything we can to resolve this issue as quickly as possible. However, this process will take some time, and we kindly ask for your patience and understanding during this period. The cases will be attended by AE shortly.

We appreciate your patience and understanding, and we are committed to providing you with the best support possible.

Thank you for your understanding.

[NazrulNaim_Intel]

Hello,

As per user 'Sstrell' stated in the previous comment. It is can be accepted as the answer. Quartus runs on a PC, not the FPGA. It generates a programming file (.sof by default) that is sent to the FPGA via USB Blaster to the device's JTAG port to program the device.

Hope that helps.

Best regards,

Nazrul Naim

[NazrulNaim_Intel]

Hello,

As we do not receive any response from you on the previous question/reply/answer that we have provided. Please login to ‘https://supporttickets.intel.com’, view details of the desire request, and post a feed/response within the next 15 days to allow me to continue to support you. After 15 days, this thread will be transitioned to community support. The community users will be able to help you on your follow-up questions.

Best regards,

Nazrul Naim