Graphics
Intel® graphics drivers and software, compatibility, troubleshooting, performance, and optimization
Avisos
FPGA community forums and blogs on community.intel.com are migrating to the new Altera Community and are read-only. For urgent support needs during this transition, please visit the FPGA Design Resources page or contact an Altera Authorized Distributor.
22747 Discusiones

Graphics tries to switch to other display

DDavi32
Novato
4.636 Vistas

I am using a laptop and it is not connected to any external display but it often goes to a black screen and sometimes a black screen on startup.

If i press F5 i can switch back to primary display.

The display adadpters listed in Device Manager are -

Intel HD Graphics 4000

Nvidia Geforce GT 650M

0 kudos
20 Respuestas
idata
Empleados
3.172 Vistas

Hello, ds123:

I would like to gather some information in order to address this matter, so please download the https://downloadcenter.intel.com/download/25293/Intel-System-Support-Utility Download Intel® System Support Utility, and attach it, with this report I will be able to confirm some of that information.

Regards,

Amy.

DDavi32
Novato
3.172 Vistas

Not done it for a while, i suspect it was overheating but not certain.

Here is the file.

https://1drv.ms/u/s!AlQfM_eehl0vh3K5r_92EaoHiq0l https://1drv.ms/u/s!AlQfM_eehl0vh3K5r_92EaoHiq0l

idata
Empleados
3.172 Vistas

Hi, ds123:

 

 

Just wanted to check if you were able to proceed with the recommendation above, also if they worked for your inquiry.

 

 

Please le us know.

 

 

Regards,

 

Esteban C
DDavi32
Novato
3.172 Vistas

With Regards to your suggestions -

  • Update the NVIDIA GeForce GT 650M driver - I need to use the older drivers for a specific game to work correctly.
  • Update the Intel® HD Graphics driver - I am using new drivers already.
  • Try resting your BIOS configuration to default - The BIOS is the newest version.

Only occasionally does it switch now, and i can press F5 to switch back displays.

DDavi32
Novato
3.172 Vistas

Just to let you know display is still switching/going black and nothing happens when i roll back driver and if i try to install a different driver version i get the message 'Windows cannot driver at this time'.

idata
Empleados
3.172 Vistas

According to your system report, you have .2653 version and the latest from our end is the .4425(https://downloadcenter.intel.com/download/25977/Intel-Graphics-Driver-for-Windows-10-and-Windows-7-8-1-15-33-?product=81499 Download Intel® Graphics Driver for Windows® 10 and Windows 7*/8.1* [15.33]). For testing purposes, can you try installing a different version of the NVIDIA GeForce GT 650M driver? By setting your BIOS to default I meant loading the default configuration, normally is done by pressing F9 once you have entered the BIOS.

Regards,

Amy.

DDavi32
Novato
3.172 Vistas

As i said earlier No new drivers will install, and i tried the latest Nvidia Driver and i get the 'Installation Failed' message.

I also reset BIOS configuration.

idata
Empleados
3.172 Vistas

There is one more method worth a try, see the attachment for the steps.

 

 

Regards,

 

Amy.

 

 

DDavi32
Novato
3.172 Vistas

I got the latest Intel Driver installed using above method.

I will see how it goes though i did not mention as well as overheating i had a loose LCD cable which i though might have been the problem before.

idata
Empleados
3.172 Vistas

I am glad to hear that you were able to install the driver, test it and let me know how it goes.

Regards,

Amy.

DDavi32
Novato
3.172 Vistas

Display still goes black every so often, i updated the driver so am thinking it is a hardware problem (LCD panel to logic board).

idata
Empleados
3.172 Vistas

It is a possibility, is there any chance you can test with a different LCD panel?

Regards,

Amy.

DDavi32
Novato
3.172 Vistas

If it was the panel, would it not just switch off completely? I took it to a repair shop and they said the cable was loose but it is doing it again.

idata
Empleados
3.172 Vistas

Well yeah, it could be possible.

Does this "I am using a laptop and it is not connected to any external display but it often goes to a black screen and sometimes a black screen on startup. If i press F5 i can switch back to primary display." persist?

Regards,

Amy.

DDavi32
Novato
3.172 Vistas

I will let you know if it does.

idata
Empleados
3.172 Vistas

Keep me posted.

Regards,

Amy.

idata
Empleados
3.172 Vistas

Hello, ds123:

How is your system behaving? Does the issue persist?

Regards,

Amy.

DDavi32
Novato
3.172 Vistas

Yes, yesterday screen was goind black every 5 seconds and starting again as i type, i have sent for a new LCD. If it still happens must be the data cable from motherboard.

idata
Empleados
3.020 Vistas

I believe this could be hardware issue, so if you get the new LCD let me know how it goes.

 

Regards,

Amy.

Responder