Graphics
Intel® graphics drivers and software, compatibility, troubleshooting, performance, and optimization
Announcements
FPGA community forums and blogs on community.intel.com are migrating to the new Altera Community and are read-only. For urgent support needs during this transition, please visit the FPGA Design Resources page or contact an Altera Authorized Distributor.
22772 Discussions

HD 4000 Lenovo Yoga problem with HDMI out

GIsra
Beginner
1,763 Views

Hello. I have encountered a weird catch 22 problem with my receiver/projector and the Intel 4000 adapter/driver. I have a Lenovo Yoga 13, win 8 64 laptop, Onkyo TX-SR875 receiver and Optoma HD 82 projector. I updated the driver to the latest from Intel's site. When I hook up the HDMI cable from the receiver to the laptop, the driver automatically sets the adapter at Monitor. At this point I lose the picture on the laptop and I don't see it on the projector. For some reason the only refresh rate that works on my receiver is 50Hz. Since my laptop outputs at 60Hz, I don't get a picture. I can blindly go to clone or extended modes and fix the monitor refresh rate and get a picture. This works as long as I am on clone or extended modes. But, on monitor only mode all displays are dark, so I can't change the settings to enable a picture on my projector. Any ideas

Thanks, gisr

0 Kudos
1 Reply
Fred_D_Intel
Employee
840 Views

Hi gisr,

I recommend updating the BIOS of the computer. You can find BIOS updates on this link http://support.lenovo.com/en_US/downloads/default.page http://support.lenovo.com/en_US/downloads/default.page

You can try connecting the projector to the computer directly to see if it works fine or not that way.

If the issue persists I recommend contacting Lenovo in order to get more advanced troubleshooting steps.

0 Kudos
Reply