Graphics
Intel® graphics drivers and software, compatibility, troubleshooting, performance, and optimization
Announcements
FPGA community forums and blogs on community.intel.com are migrating to the new Altera Community and are read-only. For urgent support needs during this transition, please visit the FPGA Design Resources page or contact an Altera Authorized Distributor.
22745 Discussions

ICH10 Family SMBus controller latency Problem

idata
Employee
2,246 Views

Hi

I have a big problem with latency with drivers on my win7 64

The latency goes threw the roof on boot and stays there.

I have disabled everything and used startup diagonstics to load just the syatem drivers.

But the only thing that will carm the latency down some what is the SMBus controller if i disable this the latency really goes down but still way to much over head in the latency.

I do not know where to go from here to fix the problem I have the newest drivers on my system for the SMBus I have v1.0.0.2 which was made 08/06/2010.

I get latency with the driver every 3 or 4 seconds.

But if I enable the SMBus again the resources are not enabled because it say it had a problem.

Before I disable the SMBus in device manager.

After I disable the SMBus in device manager.

As you can see there is a major differance in the results of the driver latency but not a fix for the real problem and how to find what is causing the problem.

Does anyoe have any idea what to do next, I have not touched the Bios settings to see if they make a difference because ,I do not want to mess about with the bios and make thing worse,I have a EX58-UD5 v1 board been out 2 years now so should not be suffering from bad drivers or bios really.

0 Kudos
2 Replies
idata
Employee
1,399 Views

Quick update

Had a look in the bios and disabled a few things :

HEPT

EIST

Onboard Sound

c3/c6/c7

c1

But still the same results only the SMBus will reduce the latency so I guess its the only thing thats making the latency or most of it.

0 Kudos
idata
Employee
1,399 Views

Another update

Formated my pc today and exactly the same on boot from the very start.

0 Kudos
Reply