Is 10.1.0.1008 Right for me?

[idata]

I currently have the following.

Kingston SNVP325-S2 SSD and WDC WD500gb ATA

These are on an ASUS P6X58D-E Board with an Intel 930 CPU.

The drivers are the Microsoft Default drivers with Windows 7 Professional x64 build 7600.

I DO NOT want RAID, but I do want the best I can get for the SSD. I have a message into

Kingston, but no response yet.

The BIOS is set at IDE, the default, and AHCI keeps Windows from Booting so that is a problem I

am trying to track down. I hear there is a register fix, but only hear, no solution. I do not want to

re-install the OS on the SSD as again I hear the SSD must be CLEAN before the install. This would

of course wipe out 9 months of work. I am not willing to do this.

Thanks

Chuck

mailto:cdridgley@cox.net cdridgley@cox.net

[idata]

I am replying to my post. I found the Registry change that supposedly will have Windows install the AHCI drivers. HKEY_LOCAL_MACHINE\SYSTEM\CURRENTCONTROLSET\SERVICES

Click MSAHCI

RIGHT CLICK START

MODIFY Change 3 to 0

Re-Boot to Change BIOS Settings to AHCI.

I am still wondering if I need this in order to have TRIM do its job.

I checked and TRIM commands are ENABLED.