hi all, let me freely admit i am new to raid so hopefully this will be an easy question for you to answer.
i'm using intel matrix storage console (8.9.0.1023) and have set up a raid array with two disks containing one raid 1 and one raid 0 volumes. I did this from the bios and both volumes are recognised in intel msc.
Win 7 is installed on the raid 0 volume but disk management does not recognise the raid 1 volume. instead it requests i initialize the disk but even then i cannot see the disk in explorer or get any files onto it.
Can i have both raid 0 and 1 volumes in one array, if so, what is the process for doing this please?
thanks
obe.
windows 7 64bit
intel p55 core i5
intel msc 8.9.0.1023
