Error in provisioning an iAMT device

[peri]

Hi,

I am trying to provision the iAMT 2.0 device using the SCA that comes with Intel_R__AMT_SDK_Release_5.1.1. I see the following error messages in the SCA console.

Waiting for incoming connection...
[2010-01-04 11:48:26] Incoming Connection from 164.99.96.49:16994
Incoming data is:
Configuration version: PSK Configuration
Count : 2
UUID : 20C305E8-AC0D-DC11-A7CD-000EA68F7399
PID : 0000-000C

reading configuration from default.conf.xml

>> starting soap call sequence <<

Error: failed while calling GetCoreVersion
Res = 401
Error 401 fault: SOAP-ENV:Server [no subcode]
"HTTP Error"
Detail: HTTP/1.1 401 Unauthorized
- failed to establish connection with AMT
- attempt to connect using default credentials...
Error: failed while calling GetCoreVersion
Res = 401
Error 401 fault: SOAP-ENV:Server [no subcode]
"HTTP Error"
Detail: HTTP/1.1 401 Unauthorized
- failed to establish connection with AMT
Aborting configuration
Warning: SetProvisioningParameters() failed

But i set the cfg_username to admin and cfg_password set to MEBx password. Could you please let me know what causes this error?

Thanks,
Periyasamy

[peri]

Discard this post.

i was trying with an incorrect default.conf.xml :)


Quoting - pperiyasamy

Hi,

I am trying to provision the iAMT 2.0 device using the SCA that comes with Intel_R__AMT_SDK_Release_5.1.1. I see the following error messages in the SCA console.

Waiting for incoming connection...
[2010-01-04 11:48:26] Incoming Connection from 164.99.96.49:16994
Incoming data is:
Configuration version: PSK Configuration
Count : 2
UUID : 20C305E8-AC0D-DC11-A7CD-000EA68F7399
PID : 0000-000C

reading configuration from default.conf.xml

>> starting soap call sequence <<

Error: failed while calling GetCoreVersion
Res = 401
Error 401 fault: SOAP-ENV:Server [no subcode]
"HTTP Error"
Detail: HTTP/1.1 401 Unauthorized
- failed to establish connection with AMT
- attempt to connect using default credentials...
Error: failed while calling GetCoreVersion
Res = 401
Error 401 fault: SOAP-ENV:Server [no subcode]
"HTTP Error"
Detail: HTTP/1.1 401 Unauthorized
- failed to establish connection with AMT
Aborting configuration
Warning: SetProvisioningParameters() failed

But i set the cfg_username to admin and cfg_password set to MEBx password. Could you please let me know what causes this error?

Thanks,
Periyasamy