- Marcar como nuevo
- Favorito
- Suscribir
- Silenciar
- Suscribirse a un feed RSS
- Resaltar
- Imprimir
- Informe de contenido inapropiado
From the "Configuration Guide for the Intel® Distribution of OpenVINO™ toolkit 2020.4 and the Intel® Vision Accelerator Design with an Intel® Arria® 10 FPGA SG2 (IEI's Mustang-F100-A10) on Linux", there is a note mentioning that "Intel® Arria® 10 FPGA (Mustang-F100-A10) Speed Grade 1 is not available since the OpenVINO 2020.3 release".
Is there a way(any linux command/utility) to check if the FPGA card being used is SG1 or SG2 ?
PFA o/p of the card being used:
$ lspci | grep -i Altera
01:00.0 Processing accelerators: Altera Corporation Device 2494 (rev 01)
- Marcar como nuevo
- Favorito
- Suscribir
- Silenciar
- Suscribirse a un feed RSS
- Resaltar
- Imprimir
- Informe de contenido inapropiado
Hi Sandesh,
Please refer to the product label on the fan cover side or by the product SKU:
Mustang-F100-A10-R10 => SG1; Mustang-F100-A10E-R10 => SG2
Regards,
Munesh
Enlace copiado
- Marcar como nuevo
- Favorito
- Suscribir
- Silenciar
- Suscribirse a un feed RSS
- Resaltar
- Imprimir
- Informe de contenido inapropiado
Hi Sandesh,
Please refer to the product label on the fan cover side or by the product SKU:
Mustang-F100-A10-R10 => SG1; Mustang-F100-A10E-R10 => SG2
Regards,
Munesh
- Marcar como nuevo
- Favorito
- Suscribir
- Silenciar
- Suscribirse a un feed RSS
- Resaltar
- Imprimir
- Informe de contenido inapropiado
Hi Sandesh,
Intel will no longer monitor this thread since we have provided a solution. If you need any additional information from Intel, please submit a new question.
Regards,
Munesh

- Suscribirse a un feed RSS
- Marcar tema como nuevo
- Marcar tema como leído
- Flotar este Tema para el usuario actual
- Favorito
- Suscribir
- Página de impresión sencilla