I know on OpenVINO's website it only lists "Intel® Arria® 10 GX FPGA Development Kit" and the "Intel® Programmable Acceleration Card with Intel® Arria® 10 GX FPGA" as its target FPGA platforms. But is there any chance that it also supports Nallatech 385A (w/ Arria 10 GX1150 FPGA)? Or is there a special OpenCL BSP needed to extend support for OpenVINO?
Theoretically, you could run OpenVINO on the Nallatech 385A but we have not validated this hardware and the OpenCL runtime is available in the OpenVINO package. If you want more instructions on how to get OpenVINO working on FPGA and want reference instructions that you could maybe use to get OpenVINO on Nallatech 385A working here is the link .
Monique was suggesting you can try to use the current OpenVINO FPGA installation process on Nallatech 385A board, did you have a chance to try it?
I compared the spec between these 2 product and I think they are very similar, this is why we suggested to try it, we just have a chance to validate Nallatech hardware; here were the spec I checked:
Nallatech 385A: https://www.nallatech.com/store/fpga-accelerated-computing/pcie-accelerator-cards/nallatech-385a-arria10-1150-fpga/
Arria 10 FPGA development kit hardware spec: https://www.intel.com/content/dam/altera-www/global/en_US/pdfs/literature/hb/arria-10/a10_overview.pdf
Let me know if you have any questions.