Intel® Enpirion® Power Solutions
Support for Intel® Enpirion® DC-DC Step-Down Power Converters
Announcements
This forum offers only peer-to-peer support. Thank you!
212 Discussions

I am using the EM2120H01QI and want to set the output voltage to +3.6V, I do not see how to do this in the datasheet can you provide the values for RVSET, R1DIV and R2DIV.

JMorr38
Beginner
427 Views
 
0 Kudos
1 Reply
Mostafa_Intel_AE
Employee
201 Views

Hello Jim,

 

To generate 3.6Vout from EM2120H, you need to adjust the following component

RVSET = 6.81K

R1DIV= 2K

R2Div= 665Ohm

 

Please note that, if you are using the PMBUS to read back the Vout, you will need to scale the Vout reading value by 2, but the actual voltage that the board generates will be 3.6V.

 

Regards,

Mostafa

 

Reply