Intel® ISA Extensions
Use hardware-based isolation and memory encryption to provide more code protection in your solutions.

How to build serial communication with Intel Galileo ?

PENGSHEN_Y_
Beginner
377 Views

char number;
void setup()
{
Serial.begin(9600);
pinMode(13,OUTPUT);
 
}
void loop()
{
if(Serial.available())
{
number = Serial.read();
Serial.println(number);
if(number=='A')
{digitalWrite(13,HIGH);}
if(number=='B')
{digitalWrite(13,LOW);}
}
}

 

 

I want to use bluetooth (control by mobile phone) to control the pin13 LED.

I use HC-06 bluetooth model to do that , the RX of HC-06 is connect to TX of Galileo and TX of HC-06 is connect to RX of Galileo.

However it fail   , I dont know the reason but it sucessful on ARDUINO , I want to find some help

It is successful on laptop to control the LED13 , but i could not use HC-06 to control it  :(

0 Kudos
4 Replies
PENGSHEN_Y_
Beginner
377 Views

I need some help please QAQ

0 Kudos
Derp_K_
New Contributor I
377 Views

Can you check this i used it in my manual robot


 

#include <SoftwareSerial.h>

SoftwareSerial BT(12, 13);     // RX, TX , pins could be edited


int BluetoothData = 0;             

void setup()

          {

                 BT.begin(9600); 
    
           }

void loop() {
    
      if ( BT.available() )
     {
        BluetoothData = BT.read();
        
            switch (BluetoothData)      
               {
                case 'A' :                         
                            // Your code here
                break;
                
    
                case 'B' :         
                            // Your code here
                break;
                
 
                case 'C' :                        
                            // Your code here
                break;
 
                case 'D' :
                            // Your code here
                break;

               
           default :
                            // Your code here
               
 
             }
             
             delay (10); // For next data
 }

}

 

0 Kudos
Derp_K_
New Contributor I
377 Views

0 Kudos
PENGSHEN_Y_
Beginner
377 Views

Reply #3 :

It successfuly work on Arudino and serial output at Intel Galileo but it not work at HC-06

 

Reply #4:

Thanks for your help , but my board is not Arudino

0 Kudos
Reply