Intel® Optane™ Memory
Support for Issues Related to Intel® Optane™ Memory
Announcements
Want to learn how Intel® Optane™ Memory can help your business? Talk to our Expert!

Looking for our RealSense Community? Click HERE

The Intel® SSD Toolbox and Intel® Data Center Tool are now End-Of-Life, see for more information and replacements tools here
1346 Discussions

There are no valid disk pairs in your system

Jeff430
Novice
2,581 Views

Hello everyone,

yesterday i got my hand on a stick M10 16GB optane memory, i would like to use to boost my HDD which i used to store game. However, after installing Intel Optane Memory and storage management and change Bios SATA mode to Intel RST, this show up and now clue what went wrong. 

Motherboard: Gigabyte B560M AORUS PRO AX

Bios Version: F9

CPU:  i5 1140

 

Thanks in advance

Jeff

0 Kudos
1 Solution
Jeff430
Novice
322 Views

As it turns out, the motherboard does not support to use optane memory on the second m.2 slot, which is connected to the chip set. After i plug in to the m.2 which directly connect to cpu, problem sloved. However i lost the only one pcie 4.0 m.2 if i use in that way. 

View solution in original post

0 Kudos
17 Replies
Pintu
Employee
2,543 Views

Hello Jeff430,


Greeting for the day.


I hope this message finds you well.


As per this case, kindly help with complete details of SSD to proceed further.


Thank you for your cooperation and support.

 


Regards,

Manoranjan


0 Kudos
Jeff430
Novice
2,465 Views

Hi manoranjan,

 

Sorry i didn't reply yesterday, i was on duty.

 

This are the detail of the nvme device and hdds show in the bios, intel optane memory and storage management and intel memory and storage tool. Hope this help you identify the problem. 

 

Jeff

0 Kudos
LeonWaksman
Super User
2,519 Views

1. Is the Optane Memory drive recognized in BIOS?

2. Can you see your HDD and the Optane Module in the Intel Optane Management and Storage on the Manage tab?

3. If the Optane Memory was previously used in other computer, could be that it is filled with old meta data. So you should first clean this module 

4. Follow the Optane Installation Guidelines from the User Manual page 44. Remember that the HDD to be accelerated should have GPT partition rather than MBR.

Leon

 

0 Kudos
Jeff430
Novice
2,462 Views

Leon,

Thanks for the advice, and i have double check my settings throught your advice. 

1. The optane memory drive is recognized in BIOS

2. I can see my HDD and the Optane Module in the Intel Optane management and Storage on the Manage tab, but not on Intel Optnae Memory tab.

3. The Optane Memory is never used before, nonetheless i still clean this module using CMD.

4. I did follow the installation guidelines form the user, however, despite all the drive are reconized, and HDD are in GPT, the Intel Optane management and Storage on the Manage tab still show no valid disk pairs in my system. 

 

Jeff

0 Kudos
Pintu
Employee
2,485 Views

Hello Jeffrey Cheung,

 

Greetings for the day!

 

We are currently awaiting your response regarding the case. If you have any queries or require further assistance, please feel free to respond to the community post. We are more than happy to assist you.

 

Thank you for choosing Intel products and services.

 

Regards,

Manoranjan.


0 Kudos
Pintu
Employee
2,421 Views

Hello Jeffrey Cheung,

 

Greetings for the day!


We appreciate your response to the case. We are actively working on this case, and we will update you on its status as soon as possible.

 

Thank you for choosing Intel products and services.

 

Regards,

Manoranjan.


0 Kudos
LeonWaksman
Super User
2,416 Views

Hello Jeff,

Please refer to attached to your post BIOS_03.jpg image. The instructions in User Manual calls for: "Then depending on which M.2 connector you install the Optane™ memory in, set the corresponding PCIe Storage Dev on Port XX item to RST Controlled." In your BIOS the settings are: "Not RST controlled"

 

 

Leon

 

Jeff430
Novice
2,374 Views

Hi Leon,

Thanks for you help, but the option of "PCIe Storage Dev on Port XX item to RST controlled" is greyed out and not able to switch, therefore i switched "RST Control PCIe Storage Devices" to "Auto", and the problem still there.

Or it's the problem of the BIOS? I had recently downgrade from BIOS F12 to F9 because of in version F12, only AHCI is avaible on the "SATA mode" and option "Intel RST..." not even show up. 

 

Jeff

0 Kudos
LeonWaksman
Super User
2,362 Views

HI Jeff,

I don't have this Gigabyte board in my hand to check why this option is grayed out. But probably this port (9) can't be RST controlled. So, you may try to install the Optane memory Module in the second M.2 port and check if you can activate the "RST Controlled" mode. 

On the attached image, I can't see in which port number the Optane is installed, but you can see it in BIOS.

If the above will not help, you should ask for help in Gigabyte support/forum.

Leon

 

0 Kudos
Pintu
Employee
1,008 Views

Hello Jeff,


Greeting for the Day!


We are currently awaiting your response regarding the case. If you have any queries or require further assistance, please feel free to respond on the community post. We are more than happy to assist you.


Thank you for choosing Intel products and services.


Regards,

Manoranjan.



0 Kudos
Pintu
Employee
543 Views

Hello Jeffrey Cheung,


Greeting for the Day!


We are currently awaiting your response regarding the case. If you have any queries or require further assistance, please feel free to respond on the community post. We are more than happy to assist you.


Thank you for choosing Intel products and services.


Regards,

Manoranjan Das.


0 Kudos
Pintu
Employee
478 Views

Hello Jeff,


Greeting for the Day!


We are currently awaiting your response regarding the case. If you have any queries or require further assistance, please feel free to respond on the community post. We are more than happy to assist you.


Thank you for choosing Intel products and services.


Regards,

Manoranjan Das.


0 Kudos
Jeff430
Novice
323 Views

As it turns out, the motherboard does not support to use optane memory on the second m.2 slot, which is connected to the chip set. After i plug in to the m.2 which directly connect to cpu, problem sloved. However i lost the only one pcie 4.0 m.2 if i use in that way. 

0 Kudos
Azeem_Intel
Employee
295 Views

Hello Jeff,

 

Greeting for the Day!

 

Thank you for the update. Can we proceed to close the case at this moment?

 

Thank you for choosing Intel products and services.

 

Best Regards,

Azeem_Intel


0 Kudos
Jeff430
Novice
254 Views

Hi Azeem_Intel,

 

Sure, to proceed to close the case. However i would like to note out that, not able to use optane via south bridge's PCI-E line is concerned, it could be used to accelated a HDD while having a fast SSD which PCI-E is connect directly connect to CPU. This could potentially make optane a lot more useful. 

 

0 Kudos
LeonWaksman
Super User
250 Views

A month ago, I've explained you that you should move the Optane memory to other slot, that can be "RST Controlled". I understand that it was the correct advice and now your Optane memory works. Your complains that you are loosing now the slot that could used for NVMe SSD, you should address to motherboard OEM (i.e. Gigabyte in this case) rather than to Intel. You also may buy an other motherboard that has two PCIe 4 slots.

 

Leon

 

0 Kudos
Pintu
Employee
173 Views

Hello Jeff430,

 

Greetings for the day! 

 

We would like to inform you that we are closing this request with your permission. Please don't hesitate to ask any further questions in the future. Feel free to start a new conversation.

 

Thank you for choosing Intel products and services.

 

Best Regards,

Manoranjan Das.


0 Kudos
Reply