Intel® Quartus® Prime Software
Intel® Quartus® Prime Design Software, Design Entry, Synthesis, Simulation, Verification, Timing Analysis, System Design (Platform Designer, formerly Qsys)
Announcements
FPGA community forums and blogs on community.intel.com are migrating to the new Altera Community and are read-only. For urgent support needs during this transition, please visit the FPGA Design Resources page or contact an Altera Authorized Distributor.
17267 Discussions

Arria 10: Linux Kernel Configuration

PJais1
Novice
1,047 Views

Hello ,

 

I am designing linux OS for our custom board which took reference from Arria 10 SoC. While building u-boot , I did changes in qsys for all the hardware modification at HPS side , so that a .sof file is generated which build a uboot_mkpimage.bin .

 

But I am confused with the kernel configuration , I took reference from https://rocketboards.org/foswiki/Documentation/A10GSRDGeneratingTheLinuxDeviceTreeLTS

which indicated that a dtb file is generated which is required to boot linux kernel.

This file is generated using sopcinfo and board xml files.

In order to boot the custom board , do we need to make any change in sopcinfo or board xml files , as we did in uboot build ?

If so ,how to modify xml files?

 

please do reply.

 

Thanks,

Priya

0 Kudos
1 Reply
EBERLAZARE_I_Intel
754 Views

Hi,

 

In my understanding, if the changes in Qsys have connections with the HPS it needs to be rebuild.

 

Have you check the HOWTO Create a Device Tree:

https://rocketboards.org/foswiki/Documentation/HOWTOCreateADeviceTree

 

There are sections for Arria 10 SoC, I recommend that you check it out.

Reply