I am trying to modify and compile the De1-SoC Computer System that Intel has created, however I am getting this error when I compile my system. This error appears both on the original Computer System and the one I modified. Any help?

[NRoba]

Problem Details

Error:

Internal Error: Sub-system: FSV, File: /quartus/fitter/fsv/fsv_register_packer_clk_region_callback.cpp, Line: 171

target_gid != DEV_ILLEGAL_GLOBAL_ID

Stack Trace:

0x2e507: FSV_REGISTER_PACKER_CLK_REGION_CALLBACK::is_io_packing_feasible + 0x417 (fitter_fsv)

0x13ffa6: FSAC_FF_RP_LEGALITY_CALLBACK_MGR::do_io_packing_feasibility_callbacks + 0x46 (FITTER_FSAC)

0x276380: FSAC_FF_REGISTER_PACKER_OP_BODY::try_to_pack_fast_inputs + 0x4b0 (FITTER_FSAC)

0x274782: FSAC_FF_REGISTER_PACKER_OP_BODY::pack_registers_due_to_io_fast_register_and_pll_source_sync_mode_assignments + 0xcd2 (FITTER_FSAC)

0x275147: FSAC_FF_REGISTER_PACKER_OP_BODY::pack_registers_opportunistically + 0x1e7 (FITTER_FSAC)

0x26115: fsv_do_opportunistic_register_packing + 0x1b5 (fitter_fsv)

0x23f44: FSV_EXPERT::fitter_preparation_post_fpp + 0x4b4 (fitter_fsv)

0x1e0df: FSV_EXPERT_BASE::fitter_preparation_run_family_fitter_preparation + 0x4f (fitter_fsv)

0x1dbd8: FSV_EXPERT_BASE::fitter_preparation + 0x68 (fitter_fsv)

0x1e830: FSV_EXPERT_BASE::invoke_fitter + 0x3b0 (fitter_fsv)

0x1c952: fsv_execute + 0x22 (fitter_fsv)

0xe910: fmain_start + 0x900 (FITTER_FMAIN)

0x41b1: qfit_execute_fit + 0x1bd (comp_qfit_legacy_flow)

0x5384: QFIT_FRAMEWORK::execute + 0x2a0 (comp_qfit_legacy_flow)

0x267f: qfit_legacy_flow_run_legacy_fitter_flow + 0x1c7 (comp_qfit_legacy_flow)

0x14410: TclInvokeStringCommand + 0xf0 (tcl86)

0x161e2: TclNRRunCallbacks + 0x62 (tcl86)

0x17a65: TclEvalEx + 0xa65 (tcl86)

0xa6f8b: Tcl_FSEvalFileEx + 0x22b (tcl86)

0xa5646: Tcl_EvalFile + 0x36 (tcl86)

0x12606: qexe_evaluate_tcl_script + 0x376 (comp_qexe)

0x11864: qexe_do_tcl + 0x334 (comp_qexe)

0x16755: qexe_run_tcl_option + 0x585 (comp_qexe)

0x380c3: qcu_run_tcl_option + 0x1003 (comp_qcu)

0x160aa: qexe_run + 0x39a (comp_qexe)

0x16e51: qexe_standard_main + 0xc1 (comp_qexe)

0x2233: qfit2_main + 0x73 (quartus_fit)

0x12e98: msg_main_thread + 0x18 (CCL_MSG)

0x1467e: msg_thread_wrapper + 0x6e (CCL_MSG)

0x16660: mem_thread_wrapper + 0x70 (ccl_mem)

0x12761: msg_exe_main + 0xa1 (CCL_MSG)

0x287e: __tmainCRTStartup + 0x10e (quartus_fit)

0x17bd3: BaseThreadInitThunk + 0x13 (KERNEL32)

0x6ce50: RtlUserThreadStart + 0x20 (ntdll)

End-trace

Executable: quartus_fit

Comment:

None

System Information

Platform: windows64

OS name: Windows 10

OS version: 10.0

Quartus Prime Information

Address bits: 64

Version: 18.1.0

Build: 625

Edition: Lite Edition

[KennyTan_Altera]

Can you check if you attempt to access HPS dedicated pins from SignalTAP which can connect to FPGA logic only. 

Some HPS peripherals can be observed via SignalTAP when interface is routed via FPGA, but this might not your case according to HPS setting of SD/MMC.

[NRoba]

Thank you, that must have been the issue I believe! I simply removed the signaltap file from the project. Runs just fine now!