Intel® Quartus® Prime Software
Intel® Quartus® Prime Design Software, Design Entry, Synthesis, Simulation, Verification, Timing Analysis, System Design (Platform Designer, formerly Qsys)
Announcements
FPGA community forums and blogs on community.intel.com are migrating to the new Altera Community and are read-only. For urgent support needs during this transition, please visit the FPGA Design Resources page or contact an Altera Authorized Distributor.
17267 Discussions

Quartus 13.1.4 internal error while compiling

Altera_Forum
Honored Contributor II
‎07-21-2014 11:26 AM
1,602 Views

Hi everyone, 

 

I just installed Quartus II 13.1.4 on Ubuntu 12.04. I tried to compile the golden hardware example which located in altera/13.1/embedded/examples/hardware/cv_soc_devkit_ghrd. I got the follwing error while compiling this project. 

 

Internal Error: Sub-system: TIS, File: /quartus/tsm/tis/tis_physical_timing_api.cpp, Line: 4402 

Found Physical Timing arcs with no logical equivalent. Need to create a derived class to handle these arcs 

Stack Trace: 

0x1bad4d: TIS_AV_HS_HPS_TIMING_ANNOTATOR::annotate_unknown_delays(BCM_TIMING_NETLIST*, QTL_HASH_LITE<unsigned int, CDB_ATOM_NODE*, QTL_OPS<unsigned int> > const&, B2T_PORT_MAP_DATA const&, _Dinkum_std::vector<BCM_TIMING_ARC, MEM_STL_ALLOCATOR<BCM_TIMING_ARC> > const&, TIS_BCM_TIMING_CACHED_DELAYS&) const + 0x3ed (tsm_tis) 

0x2c0a2a: TIS_PHYSICAL_TIMING_ANNOTATOR::annotate_atom_delays(BCM_TIMING_NETLIST*, QTL_HASH_LITE<unsigned int, CDB_ATOM_NODE*, QTL_OPS<unsigned int> > const&, B2T_PORT_MAP_DATA const&, TIS_BCM_TIMING_CACHED_DELAYS&, U2B2_PORT_MAP_DB const*, bool) const + 0x6ea (tsm_tis) 

0x368d9c: TIS_PHYSICAL_TIMING_ANNOTATOR::annotate_timing(U2B_ATOM_CONTENT*, U2B_BCM_CONTENT*, BCM_TIMING_NETLIST*, bool, TIS_BCM_TIMING_CACHED_DELAYS&, bool) const + 0x35c (tsm_tis) 

0x3641a4: TIS_PHYSICAL_TIMING_API::annotate_timing(TIS_U2B_PROXY*, _Dinkum_std::list<CDB_ATOM_NODE*, MEM_STL_ALLOCATOR<CDB_ATOM_NODE*> >::const_iterator, _Dinkum_std::list<CDB_ATOM_NODE*, MEM_STL_ALLOCATOR<CDB_ATOM_NODE*> >::const_iterator, TIS_ANNOTATION_MODE, bool) + 0x16d4 (tsm_tis) 

0x366e95: TIS_MANAGER_IMPL::annotate_bcm_netlist(CDB_CHIP_DB_ENTRY*, bool) + 0x2f5 (tsm_tis) 

0x36735e: TIS_MANAGER::annotate_bcm_netlist(CDB_CHIP_DB_ENTRY*, bool) + 0x2e (tsm_tis) 

0x1ae46: TAPI_ROOT_IMPL::annotate_non_pll_atoms(bool) + 0x590 (tsm_tapi) 

0x2c308: TAPI_ROOT_IMPL::start(TAPI_ROOT::INVOKE_MODE, bool, TAPI_TIMING_MODEL, bool, TAPI_TIMING_EDGE_DELAYS*, bool) + 0x418 (tsm_tapi) 

0x2c86b: TAPI_ROOT_IMPL::start(TAPI_ROOT::INVOKE_MODE, bool, dat_timing_models, bool, TAPI_TIMING_EDGE_DELAYS*, bool) + 0xbb (tsm_tapi) 

0x2c90e: TAPI_ROOT::start(TAPI_ROOT::INVOKE_MODE, bool, dat_timing_models, bool, TAPI_TIMING_EDGE_DELAYS*, bool) + 0x8e (tsm_tapi) 

0xeb8c8: FITCC_TDC_UTILITY::initialize_dat(TAPI_ROOT::INVOKE_MODE, dat_timing_models, bool, bool, bool) + 0x438 (fitter_fitcc) 

0xf9c67: FITCC_TDC_UTILITY::setup_tdc_utility(TAPI_ROOT::INVOKE_MODE, dat_timing_models, bool, bool, bool, bool, bool, bool, bool) + 0xfc7 (fitter_fitcc) 

0x13c412: FITCC_TDC_UTILITY::FITCC_TDC_UTILITY(FITCC_ENV const*, TAPI_ROOT::INVOKE_MODE, dat_timing_models, bool, bool, bool, bool, bool, bool, bool) + 0x2a2 (fitter_fitcc) 

0x13cb75: FITCC_ENV::get_tdc_utility_or_create_if_necessary(FITCC_ENV::FITCC_TDC_UTILITY_REQUEST_TYPE, TAPI_ROOT::INVOKE_MODE, dat_timing_models, bool, bool, bool, bool) + 0x5f5 (fitter_fitcc) 

0x4b0a0: FSV_EXPERT::fitter_preparation_post_fpp(bool) + 0x13e0 (fitter_fsv) 

0x4bb85: FSV_EXPERT::fitter_preparation() + 0x65 (fitter_fsv) 

0x3caab: FSV_EXPERT_BASE::fitter_preparation() const + 0x5cb (fitter_fsv) 

0x3ef5e: FSV_EXPERT_BASE::invoke_fitter() const + 0x8be (fitter_fsv) 

0x393fd: fsv_execute + 0x2cd (fitter_fsv) 

0x2a43c: fmain_start(CMP_FACADE*) + 0x68c (fitter_fmain) 

0x18857: qfit_execute_fit(QCU_FRAMEWORK*, QFIT_FRAMEWORK*) + 0x157 (comp_qfit_legacy_flow) 

0x114e0: QFIT_FRAMEWORK::execute() + 0x2d0 (comp_qfit_legacy_flow) 

0x25065: qfit_legacy_flow_run_legacy_fitter_flow + 0x285 (comp_qfit_legacy_flow) 

0x1ea06: TclInvokeStringCommand + 0x76 (tcl8.5) 

0x23352: TclEvalObjvInternal + 0x302 (tcl8.5) 

0x24be1: TclEvalEx + 0x401 (tcl8.5) 

0x256bb: TclEvalObjEx + 0x41b (tcl8.5) 

0x2c282: Tcl_EvalObjCmd + 0xd2 (tcl8.5) 

0x23352: TclEvalObjvInternal + 0x302 (tcl8.5) 

0x69e64: TclExecuteByteCode + 0x20e4 (tcl8.5) 

0xb1e6a: TclObjInterpProcCore + 0x11a (tcl8.5) 

0xb23c7: TclObjInterpProc + 0x67 (tcl8.5) 

0x23352: TclEvalObjvInternal + 0x302 (tcl8.5) 

0x69e64: TclExecuteByteCode + 0x20e4 (tcl8.5) 

0xb1e6a: TclObjInterpProcCore + 0x11a (tcl8.5) 

0xb23c7: TclObjInterpProc + 0x67 (tcl8.5) 

0x23352: TclEvalObjvInternal + 0x302 (tcl8.5) 

0x24be1: TclEvalEx + 0x401 (tcl8.5) 

0x2523e: Tcl_EvalEx + 0x2e (tcl8.5) 

0x91a61: Tcl_FSEvalFileEx + 0x281 (tcl8.5) 

0x91bcc: Tcl_FSEvalFile + 0x2c (tcl8.5) 

0x91c1e: Tcl_EvalFile + 0x3e (tcl8.5) 

0xccf1: qexe_evaluate_tcl_script(char const*) + 0x491 (comp_qexe) 

0x12b92: qexe_do_tcl(QEXE_FRAMEWORK*, char const*, char const*, _Dinkum_std::list<_Dinkum_std::basic_string<char, _Dinkum_std::char_traits<char>, MEM_STL_ALLOCATOR<char> >, MEM_STL_ALLOCATOR<_Dinkum_std::basic_string<char, _Dinkum_std::char_traits<char>, MEM_STL_ALLOCATOR<char> > > > const&, bool, bool) + 0x5f7 (comp_qexe) 

0x13b08: qexe_run_tcl_option(QEXE_FRAMEWORK*, char const*, _Dinkum_std::list<_Dinkum_std::basic_string<char, _Dinkum_std::char_traits<char>, MEM_STL_ALLOCATOR<char> >, MEM_STL_ALLOCATOR<_Dinkum_std::basic_string<char, _Dinkum_std::char_traits<char>, MEM_STL_ALLOCATOR<char> > > >*, bool) + 0x571 (comp_qexe) 

0x2b64f: qcu_run_tcl_option(QCU_FRAMEWORK*, char const*, _Dinkum_std::list<_Dinkum_std::basic_string<char, _Dinkum_std::char_traits<char>, MEM_STL_ALLOCATOR<char> >, MEM_STL_ALLOCATOR<_Dinkum_std::basic_string<char, _Dinkum_std::char_traits<char>, MEM_STL_ALLOCATOR<char> > > >*, bool) + 0x94e (comp_qcu) 

0x78d4: qfit2_run_fit_mode(ACF_VARIABLE_TYPE_ENUM, char const*) + 0x94 (quartus_fit) 

0x1648c: qexe_standard_main(QEXE_FRAMEWORK*, QEXE_OPTION_DEFINITION const**, int, char const**) + 0x566 (comp_qexe) 

0x7719: qfit2_main(int, char const**) + 0xe9 (quartus_fit) 

0x281da: msg_main_thread(void*) + 0x18 (ccl_msg) 

0x529e: thr_final_wrapper + 0xe (ccl_thr) 

0x28fc0: msg_thread_wrapper(void* (*)(void*), void*) + 0x6c (ccl_msg) 

0x1775d: mem_thread_wrapper(void* (*)(void*), void*) + 0xdd (quartus_fit) 

0xfec9: err_thread_wrapper(void* (*)(void*), void*) + 0x2a (ccl_err) 

0x56fa: thr_thread_wrapper + 0x2f (ccl_thr) 

0x3bfc7: msg_exe_main(int, char const**, int (*)(int, char const**)) + 0xb7 (ccl_msg) 

0x79dd: main + 0x3d (quartus_fit) 

0x194d3: __libc_start_main + 0xf3 (c.so.6) 

0x6fb1: __gxx_personality_v0 + 0x299 (quartus_fit) 

 

 

End-trace 

 

 

Quartus II 32-bit Version 13.1.4 Build 182 03/12/2014 SJ Full Version 

Patches Installed: 4.44 

 

 

Can anyone help? 

 

Arthur
0 Kudos

Link Copied

4 Replies
Altera_Forum
Honored Contributor II
‎09-16-2014 08:28 PM
752 Views

The same happens to me with the GHRD on latest Quartus 14.0.1 on Fedora 20 system: 

 

Problem Details 

Error: 

Internal Error: Sub-system: TIS, File: /quartus/tsm/tis/tis_physical_timing_api.cpp, Line: 4396 

Found Physical Timing arcs with no logical equivalent. Need to create a derived class to handle these arcs 

Stack Trace: 

0x20ce3c: TIS_AV_HS_HPS_TIMING_ANNOTATOR::annotate_unknown_delays(BCM_TIMING_NETLIST*, QTL_HASH_LITE<unsigned int, CDB_ATOM_NODE*, QTL_OPS<unsigned int> > const&, B2T_PORT_MAP_DATA const&, _Dinkum_std::vector<BCM_TIMING_ARC, MEM_STL_ALLOCATOR<BCM_TIMING_ARC> > const&, TIS_BCM_TIMING_CACHED_DELAYS&) const + 0x39c (tsm_tis) 

0x288b82: TIS_PHYSICAL_TIMING_ANNOTATOR::annotate_atom_delays(BCM_TIMING_NETLIST*, QTL_HASH_LITE<unsigned int, CDB_ATOM_NODE*, QTL_OPS<unsigned int> > const&, B2T_PORT_MAP_DATA const&, TIS_BCM_TIMING_CACHED_DELAYS&, U2B2_PORT_MAP_DB const*, bool) const + 0x682 (tsm_tis) 

0x32ef86: TIS_PHYSICAL_TIMING_ANNOTATOR::annotate_timing(U2B_ATOM_CONTENT*, U2B_BCM_CONTENT*, BCM_TIMING_NETLIST*, bool, TIS_BCM_TIMING_CACHED_DELAYS&, bool) const + 0x2d6 (tsm_tis) 

0x3fc696: TIS_PHYSICAL_TIMING_API::annotate_timing(TIS_U2B_PROXY*, _Dinkum_std::_List_const_iterator<_Dinkum_std::_List_val<CDB_ATOM_NODE*, MEM_STL_ALLOCATOR<CDB_ATOM_NODE*> > >, _Dinkum_std::_List_const_iterator<_Dinkum_std::_List_val<CDB_ATOM_NODE*, MEM_STL_ALLOCATOR<CDB_ATOM_NODE*> > >, TIS_ANNOTATION_MODE, bool) + 0x18c6 (tsm_tis) 

0x3fec1b: TIS_MANAGER_IMPL::annotate_bcm_netlist(CDB_CHIP_DB_ENTRY*, bool) + 0x26b (tsm_tis) 

0x206fd: TAPI_ROOT_IMPL::annotate_non_pll_atoms(bool) + 0x471 (tsm_tapi) 

0x2c5d9: TAPI_ROOT_IMPL::start(TAPI_ROOT::INVOKE_MODE, bool, TAPI_TIMING_MODEL, bool, TAPI_TIMING_EDGE_DELAYS*, bool) + 0x39d (tsm_tapi) 

0x2c9ee: TAPI_ROOT_IMPL::start(TAPI_ROOT::INVOKE_MODE, bool, dat_timing_models, bool, TAPI_TIMING_EDGE_DELAYS*, bool) + 0x88 (tsm_tapi) 

0x2ca6b: TAPI_ROOT::start(TAPI_ROOT::INVOKE_MODE, bool, dat_timing_models, bool, TAPI_TIMING_EDGE_DELAYS*, bool) + 0x59 (tsm_tapi) 

0xb12d8: FITCC_TDC_UTILITY::initialize_dat(TAPI_ROOT::INVOKE_MODE, dat_timing_models, bool, bool, bool) + 0x388 (fitter_fitcc) 

0xc005f: FITCC_TDC_UTILITY::setup_tdc_utility(TAPI_ROOT::INVOKE_MODE, dat_timing_models, bool, bool, bool, bool, bool, bool, bool) + 0x128f (fitter_fitcc) 

0x111b39: FITCC_TDC_UTILITY::FITCC_TDC_UTILITY(FITCC_ENV const*, TAPI_ROOT::INVOKE_MODE, dat_timing_models, bool, bool, bool, bool, bool, bool, bool) + 0x289 (fitter_fitcc) 

0x1121fc: FITCC_ENV::get_tdc_utility_or_create_if_necessary(FITCC_ENV::FITCC_TDC_UTILITY_REQUEST_TYPE, TAPI_ROOT::INVOKE_MODE, dat_timing_models, bool, bool, bool, bool) + 0x55c (fitter_fitcc) 

0x3e0721: FSAC_RP_UTIL_BODY::refresh_clock_atom_ids() + 0x151 (fitter_fsac) 

0x3e9421: FSAC_RP_UTIL::sweep_inverters_and_wire_luts_at_packable_boundaries() + 0x11 (fitter_fsac) 

0x4b9aa: fsv_do_user_register_packing(FITCC_ENV*) + 0x11a (fitter_fsv) 

0x4e662: FSV_EXPERT::fitter_preparation_post_fpp(bool) + 0xd92 (fitter_fsv) 

0x4f0ff: FSV_EXPERT::fitter_preparation() + 0x5f (fitter_fsv) 

0x45157: FSV_EXPERT_BASE::fitter_preparation() const + 0x187 (fitter_fsv) 

0x46d92: FSV_EXPERT_BASE::invoke_fitter() const + 0x752 (fitter_fsv) 

0x3fee4: fsv_execute + 0x2c4 (fitter_fsv) 

0x2ac80: fmain_start(CMP_FACADE*) + 0x480 (fitter_fmain) 

0x1a6ed: qfit_execute_fit(QCU_FRAMEWORK*, QFIT_FRAMEWORK*) + 0x17d (comp_qfit_legacy_flow) 

0x14e7d: QFIT_FRAMEWORK::execute() + 0x2bd (comp_qfit_legacy_flow) 

0x24fa0: qfit_legacy_flow_run_legacy_fitter_flow + 0x1a0 (comp_qfit_legacy_flow) 

0x2e8b6: TclInvokeStringCommand + 0x76 (tcl8.5) 

0x32ade: TclEvalObjvInternal + 0x2be (tcl8.5) 

0x342d0: TclEvalEx + 0x4f0 (tcl8.5) 

0x34cd3: TclEvalObjEx + 0x393 (tcl8.5) 

0x3abf1: Tcl_EvalObjCmd + 0x91 (tcl8.5) 

0x32ade: TclEvalObjvInternal + 0x2be (tcl8.5) 

0x73a7f: TclExecuteByteCode + 0x151f (tcl8.5) 

0xb5b87: TclObjInterpProcCore + 0x107 (tcl8.5) 

0x32ade: TclEvalObjvInternal + 0x2be (tcl8.5) 

0x73a7f: TclExecuteByteCode + 0x151f (tcl8.5) 

0xb5b87: TclObjInterpProcCore + 0x107 (tcl8.5) 

0x32ade: TclEvalObjvInternal + 0x2be (tcl8.5) 

0x342d0: TclEvalEx + 0x4f0 (tcl8.5) 

0x98c30: Tcl_FSEvalFileEx + 0x230 (tcl8.5) 

0x98d2e: Tcl_EvalFile + 0x2e (tcl8.5) 

0x10476: qexe_evaluate_tcl_script(char const*) + 0x32d (comp_qexe) 

0x14625: qexe_do_tcl(QEXE_FRAMEWORK*, char const*, char const*, _Dinkum_std::list<_Dinkum_std::basic_string<char, _Dinkum_std::char_traits<char>, MEM_STL_ALLOCATOR<char> >, MEM_STL_ALLOCATOR<_Dinkum_std::basic_string<char, _Dinkum_std::char_traits<char>, MEM_STL_ALLOCATOR<char> > > > const&, bool, bool) + 0x514 (comp_qexe) 

0x1549c: qexe_run_tcl_option(QEXE_FRAMEWORK*, char const*, _Dinkum_std::list<_Dinkum_std::basic_string<char, _Dinkum_std::char_traits<char>, MEM_STL_ALLOCATOR<char> >, MEM_STL_ALLOCATOR<_Dinkum_std::basic_string<char, _Dinkum_std::char_traits<char>, MEM_STL_ALLOCATOR<char> > > >*, bool) + 0x5c3 (comp_qexe) 

0x37eb9: qcu_run_tcl_option(QCU_FRAMEWORK*, char const*, _Dinkum_std::list<_Dinkum_std::basic_string<char, _Dinkum_std::char_traits<char>, MEM_STL_ALLOCATOR<char> >, MEM_STL_ALLOCATOR<_Dinkum_std::basic_string<char, _Dinkum_std::char_traits<char>, MEM_STL_ALLOCATOR<char> > > >*, bool) + 0x894 (comp_qcu) 

0x17c37: qexe_standard_main(QEXE_FRAMEWORK*, QEXE_OPTION_DEFINITION const**, int, char const**) + 0x431 (comp_qexe) 

0x9492: qfit2_main(int, char const**) + 0xc2 (quartus_fit) 

0x3f2c2: msg_main_thread(void*) + 0x10 (ccl_msg) 

0x76fc: thr_final_wrapper + 0xc (ccl_thr) 

0x3fef3: msg_thread_wrapper(void* (*)(void*), void*) + 0x5b (ccl_msg) 

0x1bcce: mem_thread_wrapper(void* (*)(void*), void*) + 0xbe (quartus_fit) 

0xc498: err_thread_wrapper(void* (*)(void*), void*) + 0x27 (ccl_err) 

0x7adc: thr_thread_wrapper + 0x15 (ccl_thr) 

0x63f1b: msg_exe_main(int, char const**, int (*)(int, char const**)) + 0x99 (ccl_msg) 

0x21d65: __libc_start_main + 0xf5 (c.so.6) 

0x8d09: __gxx_personality_v0 + 0x301 (quartus_fit) 

 

End-trace 

 

 

Executable: quartus 

Comment: 

None 

 

System Information 

Platform: linux64 

OS name: Fedora Core 

OS version: 20 

 

Quartus II Information 

Address bits: 64 

Version: 14.0.1 

Build: 205 

Edition: Web Edition
0 Kudos
Copy link
Altera_Forum
Honored Contributor II
‎09-19-2014 07:39 AM
752 Views

Hi, 

 

The same happens to me also on latest Quartus 14.0.1 on Windows 7 system. 

 

problem details 

Error: 

Internal Error: Sub-system: TIS, File: /quartus/tsm/tis/tis_physical_timing_api.cpp, Line: 4396  

Found Physical Timing arcs with no logical equivalent. Need to create a derived class to handle these arcs  

Stack Trace:  

0x6682a: TIS_RE_DELAY_TREE_NETLIST::is_itt_starting_point + 0x67ba  

0x63edd: TIS_RE_DELAY_TREE_NETLIST::is_itt_starting_point + 0x3e6d  

0x629b8: TIS_RE_DELAY_TREE_NETLIST::is_itt_starting_point + 0x2948  

0x6d2dd: TIS_RE_DELAY_TREE_NETLIST::is_itt_starting_point + 0xd26d  

0x6e1ce: TIS_RE_DELAY_TREE_NETLIST::is_itt_starting_point + 0xe15e  

0x6e578: TIS_RE_DELAY_TREE_NETLIST::is_itt_starting_point + 0xe508  

0x51ce0: TIS_MANAGER_IMPL::annotate_bcm_netlist + 0x170  

0xfa4a: TAPI_ROOT_IMPL::annotate_non_pll_atoms + 0x4aa  

0x9400: TAPI_ROOT_IMPL::start + 0x350  

0x9c0d: TAPI_ROOT_IMPL::start + 0x7d  

0x9ef3: TAPI_ROOT::start + 0xc3  

0xb8871: FITCC_TDC_UTILITY::initialize_dat + 0x621  

0xb8acc: FITCC_TDC_UTILITY::setup_tdc_utility + 0xbc  

0xbaea2: FITCC_TDC_UTILITY::FITCC_TDC_UTILITY + 0x252  

0x3f65f: FITCC_ENV::get_tdc_utility_or_create_if_necessary + 0x35f  

0x2763b: FSV_REGISTER_PACKER_OP_INTERFACE::create_register_packer_legality_listeners + 0xe4b  

0x1d698: FSV_U2B_POSTFIT::operator= + 0x62c8  

0x144cf: fsv_initialize_fitter + 0x9af  

0x163f8: fsv_initialize_fitter + 0x28d8  

0x168a9: fsv_initialize_fitter + 0x2d89  

0x13ac2: fsv_execute + 0x22  

0xb909: fmain_start + 0x809  

0x266c: Legacy_fitter_Init + 0x15fc  

0x16ad: Legacy_fitter_Init + 0x63d  

0x1b6b: Legacy_fitter_Init + 0xafb  

0xf8a6: TclInvokeStringCommand + 0xc6  

0x112a8: TclEvalObjvInternal + 0x328  

0x121b5: TclEvalEx + 0x8d5  

0x12d48: TclEvalObjEx + 0x2d8  

0x1abbd: Tcl_EvalObjCmd + 0xfd  

0x112a8: TclEvalObjvInternal + 0x328  

0x56917: TclExecuteByteCode + 0xe47  

0xa2376: TclObjInterpProcCore + 0x76  

0x112a8: TclEvalObjvInternal + 0x328  

0x56917: TclExecuteByteCode + 0xe47  

0xa2376: TclObjInterpProcCore + 0x76  

0x112a8: TclEvalObjvInternal + 0x328  

0x121b5: TclEvalEx + 0x8d5  

0x7c117: Tcl_FSEvalFileEx + 0x1d7  

0x7a626: Tcl_EvalFile + 0x36  

0xb172: qexe_evaluate_tcl_command + 0xac2  

0x104fc: qexe_get_command_line + 0xf5c  

0x12f8d: qexe_run_tcl_option + 0x44d  

0x1b4ae: qcu_run_tcl_option + 0xace  

0x1358b: qexe_process_cmdline_arguments + 0x54b  

0x136f1: qexe_standard_main + 0xa1  

 

 

0x9678: msg_exe_fini + 0x58  

0x978c: msg_exe_fini + 0x16c  

0x12c4: MEM_INITIALIZER::~MEM_INITIALIZER + 0x184  

0xabe9: msg_exe_main + 0x99  

 

 

0x1652c: BaseThreadInitThunk + 0xc  

0x2c540: RtlUserThreadStart + 0x20  

 

 

End-trace  

 

 

Executable: quartus_fit 

Comment: 

None 

 

system information 

Platform: windows64 

OS name: Windows 7 

OS version: 6.1 

 

quartus ii information 

Address bits: 64 

Version: 14.0.1 

Build: 205 

Edition: Web Edition
0 Kudos
Copy link
Altera_Forum
Honored Contributor II
‎09-22-2014 01:48 PM
752 Views

Hello, 

 

I resolved my problem. 

I properly uninstalled all Altera software in my computer (Quartus II, SOCEDS, Modelsim Altera edition). 

Then I re-installed Quartus II 14.0, then the patch 14.0.1. 

After that the compilation worked well. There were no more error. 

 

It was maybe due to a bad removal of the previous version of Quartus II 13.1.4. 

 

I hope my reply will help you. 

 

Good luck. 

David.
0 Kudos
Copy link
Altera_Forum
Honored Contributor II
‎10-06-2014 12:26 PM
752 Views

I solved the problem by reinstalling Quartus II 14.0, BUT WITHOUT the 14.0.1 update

0 Kudos
Copy link
Reply

Community support is provided Monday to Friday. Other contact methods are available here.

Intel does not verify all solutions, including but not limited to any file transfers that may appear in this community. Accordingly, Intel disclaims all express and implied warranties, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement, as well as any warranty arising from course of performance, course of dealing, or usage in trade.

For more complete information about compiler optimizations, see our Optimization Notice.