how to Access to Register of a new component in Qsys?

KBill3 · ‎08-09-2019

Hello,

i added a new component in Qsys Project, it is an adder-block with 2 Inputs and one Output.

Through the ds-5 Debugger, i want to Access to the These two Inputs and one Output using their own Register. The Problem is : how can i find their Registers and how to give some Input values?

Thanks in Advance.

Billel

EBERLAZARE_I_Intel · ‎08-16-2019

Hi,

Here is an example design that demonstrate the development of a custom logic component, writing the register SVD file, integrate it into the system, and eventually expose the custom logic’s registers in the DS-5 debug perspective, here:

https://rocketboards.org/foswiki/Projects/UsingCMSISWithCustomFPGALogic

More info on .svd files:

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug_soc_eds.pdf#page=10

Here is a Simple DS-5 debug tutorial for your reference that demonstrate to debug a simple Hello World:

https://software.intel.com/en-us/node/720361

Regards.