Intel® Xeon® Processor and Server Products
Intel® Xeon® Processors, Data Center Products including boards, integrated systems, and RAID Storage
Avisos
FPGA community forums and blogs on community.intel.com are migrating to the new Altera Community and are read-only. For urgent support needs during this transition, please visit the FPGA Design Resources page or contact an Altera Authorized Distributor.

No boot - Xeon X3470 build

DWild5
Principiante
1.557 Vistas

Hi all,

 

I am building a PC for my buddy who doesn't have a PC. Its a modest build, and I wanted to challenge myself a bit by using all recycled parts (picked and then purchased used/new-other online) and building it as a wall-mounted PC. Here are the parts I went with:

 

MB: SuperMicro X8SIE-F

CPU: Intel Xeon X3470

RAM: 16GB (4x4GB) Micron MT36JSZF51272PDZ-1G1F1AB x8 DDR3 RDIMM

SSD: Samsung 128GB OEM SSD

GPU: Nvidia GTX 645 (which is a rebranded GTX 560 SE)

PSU: 600W Hercules small-form

 

With everything put together, here's what I get after powering-on:

1. Power on (MB power LED lit)

2. Fans power

3. No beeps, no video, nothing else

 

The only other light on the MB besides the power is the IPMU heartbeat LED indicating normal. I've tried connecting the monitor through both onboard video and through the GTX 645 (using a jumper on the board to enable/disable onboard video). I've also swapped the RAM around and tried with 2 instead of 4.

 

I could really use some help, I think I'm a skosh out of my league on this one...Thanks.

0 kudos
1 Solución
AlHill
Superusuario
1.420 Vistas

You should contact supermicro for support of their motherboard and supported peripherals.

 

Doc

 

Ver la solución en mensaje original publicado

1 Responder
AlHill
Superusuario
1.421 Vistas

You should contact supermicro for support of their motherboard and supported peripherals.

 

Doc

 

Responder