S1200BTL motherboard boot problem

[RFutt]

After BIOS/Firmware Update (24,1.05,11) of the S1200BTL motherboard in either SR1304 system, or Chenbro chassis,

the system stopps at the end of the boot.

The last message is: ME Firmware Version 2.0.8.15

We have this problem now with the 3rd board/system.

Konfiguration is with a E3-1230/1240 and 16 GB RAM.

We had configurations with RMM4 and SAS card, with and without Adaptec 5405/6405 controller, always the same problem.

[Daniel_O_Intel]

Very odd. Do you get any beep code, or system fault LEDs on the back of the board?

If you pull all the memory, do you get the three-beep code?

[idata]

Remove the RMM4 module and try again. There is a known bug.

[idata]

All problems are now solved with the new BIOS (28) and Firmware.