Intel vPro® Platform
Intel Manageability Forum for Intel® EMA, AMT, SCS & Manageability Commander
3043 Discussions

Dell Latitude 7450 Unable to create WiFi Profile

AlphaSeb
Novice
8,670 Views

Hi,

 

I'm trying to get Intel Endpoint Management Assistant to work. I have successfully provisioned a device in ACM. But "CIRA Not Connected"

The devices I try to onboard, are WiFi Only devices, Latitude 7450, Latitude 7440 etc.

 

Intel® ME: v18.0.10.2351  Admin Control Mode  
CIRA selected: Yes
Intel® AMT setup status: Pending Configuration
Hardware Management Capability: Intel® Active Management Technology
Platform Brand: Intel vPro® Enterprise
 
Power On
Connected
CIRA Not Connected
 
When I disable the WiFi Profile in the AMT-Profile, Intel® AMT setup status: succeeds.
When I add the WiFi Profile, it's stuck "Pending Configuration"
 
In the logs I see that it has problems applying the Wireless Profile:


 

2025-08-06 16:04:08.5855|ERROR||9116|3|ApplyWirelessConfiguration - MeshManageabilityServer.code.AmtSetup.WirelessManager, EMAManageabilityServer, Version=1.14.3.0, Culture=neutral, PublicKeyToken=57d11e903ea1ca2c - [1] - Failed to apply wireless configuration : (**bleep**-**bleep**,197AAD03).
Exception Level(0):WSManFault.Code: a:Sender WSManFault.SubCode: e:UnsupportedFeature
StackTrace Level(0): at Intel.Manageability.WSManagement.DotNetWSManClient.WSManSendReceive(Header header, XmlElement[] bodyIn, XmlElement[]& bodyOut)
at Intel.Manageability.WSManagement.DotNetWSManClient.Invoke(Uri resourceUri, Uri actionUri, XmlElement request, IEnumerable`1 selectors)
at Intel.Manageability.Cim.Untyped.CimObject.Invoke(String methodName, CimKeys keys, CimParams input, CimParams& output)
at Intel.Manageability.Cim.Typed.CimBase.Invoke[TInput,TOutput](String methodName, TInput input, TOutput& output)
at Intel.Manageability.Cim.Typed.AMT_WiFiPortConfigurationService.AddWiFiSettings(CimReference inWiFiEndpoint, CIM_WiFiEndpointSettings inWiFiEndpointSettingsInput, CIM_IEEE8021xSettings inIEEE8021xSettingsInput, CimReference inClientCredential, CimReference inCACredential, CimReference& outWiFiEndpointSettings, CimReference& outIEEE8021xSettings)
at ManageabilityStack.AmtWireless.AddWirelessProfile(AmtWirelessProfile profile, CIM_IEEE8021xSettings _8021XSettings, List`1 installedCertsEPRs)
at MeshManageabilityServer.code.AmtSetup.WirelessManager.AddWiFiProfile(WiFiSetup setup)
at MeshManageabilityServer.code.AmtSetup.WirelessManager.AddWiFiProfiles(WiFiConnection wiFiConnection)
at MeshManageabilityServer.code.AmtSetup.WirelessManager.ApplyWirelessConfiguration(AMTProfile amtProfile)
 
2025-08-06 16:04:08.5855|ERROR||9116|3|PerformRound2Provisioning - MeshManageabilityServer.CentralManageabilityServer, EMAManageabilityServer, Version=1.14.3.0, Culture=neutral, PublicKeyToken=57d11e903ea1ca2c - [1] - Applying wireless settings failed: (**bleep**-XXXXX). Error = WSManFault.Code: a:Sender WSManFault.SubCode: e:UnsupportedFeature
 
 
--
 
 
Why is that?

AMT is enabled in BIOS
Device was provioned via USB Stick
I can't see further options regarding WiFi in the bios or am I blind?

Thanks for helping
 
0 Kudos
29 Replies
AlphaSeb
Novice
1,034 Views

Fresh logs

0 Kudos
vish1
Employee
1,009 Views

Hello AlphaSeb,


Greetings!!


Thank you for sharing your observations along with the requested details.


For further assistance, we would like to offer a meeting on Tuesday at 4:00 PM German Time (which is 7:00 AM PST, one hour before our regular business hours) so that we can review the issue together and perform the necessary checks. Please let us know if this time works for you.


Best Regards,

Vishal Shet P

Intel Customer Support Technician

intel.com/vpro


0 Kudos
AlphaSeb
Novice
961 Views
Dear Vishal,

04:00PM on Tuesday doesn’t work for me. But it works any other day of the week.

Thank you!
0 Kudos
vish1
Employee
872 Views

Hello AlphaSeb,


Greetings!!


Thank you for letting us know. We will check the availability for another day and get back to you with an updated schedule.


Best Regards,

Vishal Shet P

Intel Customer Support Technician

intel.com/vpro


0 Kudos
AlphaSeb
Novice
813 Views

Could you please send me an email with a proposed meeting time?

Thanks.

0 Kudos
vish1
Employee
782 Views

Hello AlphaSeb,

 

Greetings!!

 

We analyzed the logs and details you shared and found that we missed updating the new FQDN by reinstalling EMA after the domain name was changed from ema.alphatrains.eu to ema.alphatrains.com.

 

It is required to use the correct FQDN that matches the certificate purchased. Otherwise, issues may occur. Please refer to the link below in the Intel EMA Server Installation Guide, section 2.2.1.3 Load Balancer Information, which shows the screenshot where you need to update the latest FQDN from ema.alphatrains.eu to ema.alphatrains.com.

 

Once this is done, please disable the option Enable WiFi profile sharing with UEFI BIOS, as this option may cause additional issues.

 

If the issue continues, please let us know your availability on Tuesday, Aug 26th.

 

Best Regards,

Vishal Shet P

Intel Customer Support Technician

intel.com/vpro

 

0 Kudos
AlphaSeb
Novice
662 Views

Dear Vishal,

 

I reinstalled the whole server from scratch.

AlphaSeb_0-1756194483403.png

 

AlphaSeb_2-1756194591120.png

AlphaSeb_3-1756194612704.png

 

AlphaSeb_4-1756194624102.png

 

 

Test-NetConnection shows success to TCP 8080 and TCP 443.

 

  • I changed my TLD to .com
  • I got new certificates for .com
  • I reinstalled the server with new .com FQDN


Still no CIRA.


Client Logs attached

0 Kudos
vish1
Employee
645 Views

Hello AlphaSeb,


Greetings!!


Thank you for providing the update.


We kindly request you to try accessing the AMT Web UI via https://localhost:16993 and log in using your username and password. I have also attached a screenshot of the AMT Web UI WiFi settings, showing how to Enable in S0, Sx/AC. After enabling, we request you to restart the endpoints.


If the issue persists after this, we request you to share the latest ECT logs with us so we can further investigate.


Intel® EMA Configuration Tool (ECT) Logs:

  1. Download the tool from the following link: Intel® EMA Configuration Tool
  2. Installation:
    • Download and unzip the tool.
    • Double-click the .msi file and follow the installation prompts.
  1. Run the Tool:
  2. a. Open a command prompt as an administrator (or use Windows PowerShell*).
  3. b. Navigate to the installation folder (default: C:\Program Files (x86)\Intel\EMAConfigTool).
  4. c. Run the following command:
  5. EMAConfigTool.exe --verbose


Please let us know your findings.


Best Regards,

Vishal Shet P

Intel Customer Support Technician

intel.com/vpro


0 Kudos
vish1
Employee
220 Views

Hello Hello AlphaSeb,


Greetings!!


We are following up on our previous email in which we provided the plan of action to be performed. Kindly let us know if you were able to proceed with the suggested steps or if you need any further assistance from our side.


Best Regards,

Vishal Shet P

Intel Customer Support Technician

intel.com/vpro


0 Kudos
Reply