Sample Decode Crashing doing JPEG decoding with VPP on d3d11

[Prakash__Sree]

The sample decoder is crashing when doing JPEG decoding & a VPP stage for the sample JPEG attached. Its crashing only for d3d11 and works fine in d3d9 & sw modes.

To regenerate the crash, just the run the sample decode with the following params (using the sample jpeg file attached) 

jpeg -hw -d3d11 -w 960 -h 480 -i ./input/Live-0-210.jpg -o ./output/Live-0-210.yuv

The actual dimension of the jpeg is 1920x960 and the above command attempts to decode the jpeg & scale it to half the original dimensions.

Curiously enough, the crash is seen only if a vpp stage is involved. It works fine even in d3d11 if we don't introduce the vpp stage.

jpeg -hw -d3d11 -w 1920 -h 960 -i ./input/Live-0-210.jpg -o ./output/Live-0-210.yuv

works fine in all modes (d3d, d3d11 & sw)

Had tried it on "Intel® Media SDK 2018 R1 - Media Samples 8.3.26.352"

Are there any corrections required in the "sample decode" to get this working?

[Mark_L_Intel1]

Thanks, 

I have reproduced what you observed and reported, I will keep you updated with the progress.

Mark

[Kumar__Akhil1]

The above fails on HD4600 with IMSDK 2018.R2 (Sept2018 release as well)

C:\Users\developer\Documents\Intel® Media SDK 2018 R2 - Media Samples 8.4.27.378\_bin\x64>sample_decode.exe jpeg -hw -d3d11  -w 960 -h 480 -i C:\akhil\Live-0-210.jpg

pretending that aspect ratio is 1:1

Decoding Sample Version 8.4.27.378

Input video     JPEG

Output format   NV12 (using vpp)

Input:

  Resolution    1920x960

  Crop X,Y,W,H  0,0,1920,960

Output:

  Resolution    960x480

Frame rate      30.00

Memory type             d3d11

MediaSDK impl           hw_d3d11

MediaSDK version        1.20

Decoding started

[ERROR], sts=MFX_ERR_DEVICE_FAILED(-17), CDecodingPipeline::RunDecoding, DecodeFrameAsync returned error status at src\pipeline_decode.cpp:1837

Frame number:    0, fps: 0.000, fread_fps: 0.000, fwrite_fps: 0.000

[ERROR], sts=MFX_ERR_DEVICE_FAILED(-17), CDecodingPipeline::RunDecoding, Unexpected error!! at src\pipeline_decode.cpp:1947

ERROR: Hardware device was lost or returned unexpected error. Recovering...

[ERROR], sts=MFX_ERR_DEVICE_FAILED(-17), CD3D11Device::Reset, Cannot create swap chain required for rendering. at src\d3d11_device.cpp:226

[ERROR], sts=MFX_ERR_DEVICE_FAILED(-17), wmain, Pipeline.ResetDevice failed at src\sample_decode.cpp:716

C:\Users\developer\Documents\Intel® Media SDK 2018 R2 - Media Samples 8.4.27.378\_bin\x64>

[Prakash__Sree]

Hi Mark,

Any updates on this issue?

Thanks And Regards,

Sree

[Mark_L_Intel1]

Hi Sree,

Apology for the long delay of this issue.

I have got confirmed from dev team that the solution was merged internally, it should be available in the open source Media SDK project with following pull request:

https://github.com/Intel-Media-SDK/MediaSDK/pull/2531

https://github.com/Intel-Media-SDK/MediaSDK/pull/2535

and https://github.com/intel-innersource/drivers.gpu.media.sdk.lib/pull/320

The Windows version will be updated at the middle of this year.

Please let me know if you have any questions.

Mark Liu

[Mark_L_Intel1]

Yes, some updates.

It seems like this is the sample issue. By turning on rendering, this issue was disappeared.

It is still under investigation.

Mark.