Mobile and Desktop Processors
Intel® Core™ processors, Intel Atom® processors, tools, and utilities
16806 讨论

Intel Processor Diagnostic Tool PCH/PCH Enum Unsupported?

VJeki
初学者
6,324 次查看

Hi Intel, I have concerns and questions about IPDT and some of tests...

Processor i7-5820K, Motherboard: Rampage 5 Extreme

All tests pass except

Front Side Bus Test - Unsupported

QPI Test - Not Tested

I special worry about these two tests:

PCH - Unsupported

PCH Enum - Unsupported

Can someone help and explain me, please?

Thanks.

0 项奖励
7 回复数
VJeki
初学者
4,636 次查看

Someone???

0 项奖励
Kevin_M_Intel
员工
4,636 次查看

Hello iFAN,

This processor does not have Front Side Bus. This is the an old technology that was included on old processors and this is the reason why the tool is reporting it is unsupported. In regards the QPI test, it is not test because this processor does not have QPI lanes so it is good.

The strange part is the PCH because this processor does have PCH and it should be tested. If the tool says it passed, then it should be okay but I also recommend you contacting our Support Center:

http://www.intel.com/p/en_US/support/contactsupport http://www.intel.com/p/en_US/support/contactsupport

Kevin M

VJeki
初学者
4,636 次查看

I know, I didn't worry because Front Side Bus. Reason why I worry is PCH and PCH Enum Test.

They should Pass and in my case they are Not Tested or Unsupported.

I don't know what to do and what can be problem?

0 项奖励
VJeki
初学者
4,636 次查看

I can't explain how much I worry because of this... I don't understand where can be problem.

I download and second IPDT zip files

And I copy files in IPDT installer and after that I got this message Not Tested.

Immediately when test start that PCH Test and PCH Enum test field as Empty others are marked as ready for testing and they Pass later.

I don't know why skip that two tests?

0 项奖励
Anonymous
不适用
4,636 次查看

Hi iFAN,

Please update the chipset driver and install the latest BIOS version 1701 of your Asus Rampage 5 Extreme motherboard using Asus website:

 

https://www.asus.com/us/Motherboards/RAMPAGE_V_EXTREME/HelpDesk_Download/ RAMPAGE V EXTREME | Motherboards | ASUS USA

Then, enable the PCH and PCH Enum tests of the Intel® Processor Diagnostic Tool and run the application again.

Regards,

 

Mike C
0 项奖励
VJeki
初学者
4,636 次查看

Hi Intel...

I saw you released new version of IPDT software 3.0.0.25 W and I decide to check again.

Now everything PASS as you can see on picture...

My settings are

4.0 GHz CPU Clock

3.5 GHz Cache (NB) Frequency

CPU Voltage 1,150V - default

Cache Voltage - default

RAM 2666MHz Strap 100

Timmings 15-15-15-35 1T.

Thanks.

0 项奖励
Anonymous
不适用
4,636 次查看

Hi iFAN,

I am glad your processor and tool are working as you expect.

Regards,

Mike C

0 项奖励
回复